Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
. The air conditioner runs in Cool mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . If the room temperature is higher than the selected temperature, the air conditioner starts cooling. . If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan continues to operate. 4 Press the button to select the fan speed until the required setting is displayed. Automatic (rotated : .. .. ) Low Medium High Maximum Result: Each time you press the button, the indoor unit beeps. 5 To control the airflow direction, refer to page 21. 08'FORTE_28591A_IB_E(.A).indd 14 2007-12-7 14:47:03 E-15 ENGLISH Selecting Heat Mode You can select Heat mode if you want to heat your room. You can adjust the temperature and the fan speed when heating. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in Heat mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . If the room temperature reaches 5°C higher than the set temperature, the air conditioner stops heating, but the fan continues to operate. . If the room temperature reaches 3°C lower than the set temperature, the air conditioner starts heating again. 4 Press the button to select the fan speed until the required setting is displayed. Automatic (rotated : .. .. ) Low Medium High Maximum Result: . Each time you press the button, the indoor unit beeps. . For the first 3~5 minutes, the fan may not operate to prevent cool air from flowing out of the indoor unit. This helps to warm the air in your room sufficiently. 5 To control the airflow direction, refer to page 21. 08'FORTE_28591A_IB_E(.A).indd 15 2007-12-7 14:47:06 E-16 Selecting Dry Mode Select Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and...
Otros modelos de este manual:Los acondicionadores de aire - AQ09FA (8.38 mb)
Los acondicionadores de aire - AQ09FAN (8.38 mb)
Los acondicionadores de aire - AQ09FAX (8.38 mb)
Los acondicionadores de aire - AQ09FC (8.38 mb)