Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
You can use the 5 Way function with the indoor unit as well as the remote control. Thus, you can use this function even though you have lost your remote control. Using with the indoor unit 1 Press the (ON/OFF) button one time and then select the desired mode. To obtain a(n)... Then select... Normal operating (STANDARD) mode Reducing the uncomfortable (NATURE) mode temperature gradually High fan speed (POWER) mode Compressor run time reduced (SAVING) mode Fan speed reduces as the temperature (SILENCE) mode decreases 2 To stop the operating, press the (ON/OFF) button until all indicators turn off. N NNNNo oooot tttte eeeeEven if the air conditioner has been turned on via the ON/OFF button on the unit, operations can still be controlled using the remote control as usual. Selecting with the Remote Control To select the 5 Way function with the remote control, press the 5 Way button one or more times until the desired mode is selected. Each time you press the 5 Way button: Each 5 Way indicator on the indoor unit lights up in order. E-10 Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed. 1 If necessary, press the (On/Off) button. Result: The 5 Way indicator on the indoor unit lights up. . The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the MODE button. The air conditioner runs in AUTO mode. N NNNNo oooot tttte eeee You can change modes at any time. 3 To adjust the standard temperature (The air conditioner automatically set the standard temperature by the current room temperature.), press the TEMPERATURE buttons one or more times. SET TEMP. SET TEMP. -SET TEMP. SET TEMP. -2°C -1°C Standard temperature +1°C +2°C < When you feel hot > < When you feel chilly > N NNNNo oooot tttte eeee Auto Change Over Function (Only the Inverter Models) . In the Automatic mode, the air conditioner selects one of COOL, HEAT, DRY depending on the indoor and outdoor temperatures. If the air conditioner has not been operated for an hour, the air conditioner will take the current temperatures again and it will restart operating in the optimum mode. Cooling Your Room You must select the Cool mode if you wish to adjust the: . Cooling temperature . Fan speed when cooling 1 If necessary, press the (On/Off) button. Result: The 5 Way indicator on the indoor unit lights up. . The air conditioner sta...
Otros modelos de este manual:Los acondicionadores de aire - AQ07A1ME (1.31 mb)
Los acondicionadores de aire - AQ07A2ME (1.31 mb)
Los acondicionadores de aire - AQ07A3ME (1.31 mb)
Los acondicionadores de aire - AQ07A4ME (1.31 mb)