Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Air swing indicator will be on and air flow blades move up and down continuously to circulate the air. Press the Air swing button on the remote control again, to keep the air flow direction in a constant position. Horizontal air flow Make sure one of the blade pin lever that stick out of the air flow blades are not broken. Move the blade pin lever left or right to keep the air flow direction in a constant position you prefer. Be extremely careful with your fingers while adjusting the Horizontal air flow direction. There is a potential risk of personal injury when the unit is mishandled. CAUTION Blade pin lever 1. 1. operating _19 AQ09R@@ series_IB_E_29893_10.20.08.indd 19 2008-10-20 9:29:03 using advanced functions USING THE TURBO FUNCTION Turbo function will be helpful to cool or heat your room quickly and effectively by operating at the maximum fan speed for 30 minutes. 1. Turn on the air conditioner. Press the Power button on the remote control. 2. Set the operating mode. Press the Turbo button on the remote control until Turbo indicator appears on the remote control display. The air conditioner operates in Auto fan speed and automatically adjusts the temperature according to the current room temperature. The unit operates for 30 minutes and then operates in last used mode, or in Auto mode if Dry/Fan mode is most recent mode used. Turbo function is only available in Auto/Cool/Heat mode. If Turbo function is selected in Dry/Fan mode, operating mode changes to Auto. To deactivate Turbo function 1. Press the Turbo button on the remote control while Turbo function is on. The air conditioner operates in last used mode, or in Auto mode if Dry/Fan mode is most recent mode used. • While you are using the remote control, make sure corresponding indicator appears on the remote control display. • Temperature/Fan speed cannot be adjusted while using this function. • Air flow can be adjusted manually (see page 19 for instructions). • If you press the Mode button while the Turbo function is on, it will cancel the function. 20_ using advanced functions AQ09R@@ series_IB_E_29893_10.20.08.indd 20 2008-10-20 9:29:05 using advanced functions _21 ENGLISH SETTING TIMER This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are away. Simply set the time and your air conditioner will turn on/off automatically. On Timer This function allows you to turn on the air conditioner automatically within the time range of 24 hours. On timer is available while your air conditioner is off. 1. Press the On Timer button on the remote control. On timer indicator blinks on the remote control display. 2. Set the time you want the air conditioner to turn on automatically. Press the On Timer button on the remote control to change the time setting while On timer indicator is blinking. You can set the time up to 24 hours, increasing in 30 minute unit up to first 3 hours and in hourly unit after first 3 hours. 3. Press the Set/Cancel button on the remote control to active it on. The remote control display will show the hour(s) you have set for 3 seconds and set desired temperature will display. The air conditioner will operate automatically at set time and then On timer indicator stops blinking and stays on. If On timer is not set within 10 seconds, the air conditioner will end setting. 4. Set the operating mode. Press the Mode button on the remote control until the desired mode appears on the remote control display. The air conditioner will operate in the mode you set. On timer function is available in Auto/Cool/Dry/Fan/ Heat mode. • Temperature can also be adjusted (see step 3 on page 14 for instructions). • All the indicators other than On Timer indicator will disappear approximately after 10 seconds after the setup. • When the On Timer setting is done, you can press the On Timer button again to change the preset time. Press the On Timer button to change time setting and then press the Set/Cancel button to active it on. To deactivate the On Timer 1. Press the Set/Cancel button on the remote control while On Timer is on. On timer you set ...
Otros modelos de este manual:Los acondicionadores de aire - AQ09RGAN (8.36 mb)
Los acondicionadores de aire - AQ09RGAX (8.36 mb)
Los acondicionadores de aire - AQ09UGBN (8.36 mb)
Los acondicionadores de aire - AQ09UGBX (8.36 mb)