Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Result: The indoor unit beeps each time you press the button. The air conditioner runs in DRY mode. Notte You can change modes at any time. 3 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically. 4 To control the direction of the air flow, refer to pages 16 and 17. IMPORTANT Airing Your Room E-13 ENGLISH If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in FAN mode. The temperature is set automatically. Notte You can change modes at any time. 3 Select the fan speed by pressing the button one or more times until the required setting is displayed: Low Medium High Result: Each time you press the button, the indoor unit beeps. 4 To control the direction of the air flow, refer to pages 16 and 17. Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, select the Energy saving mode with the Energy saving button. 3 Press the button. Result: The indoor unit beeps. The air conditioner runs in the Energy saving mode. The outer air flow blade moves up and down. To stop the Energy saving mode, press the button again. 4 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 26°C and 30°C inclusive. Notte If you want to adjust temperature under 26°C, cancel the Energy saving mode before adjusting the temperature. 6 To control the direction of the air flow, refer to pages 16 and 17. 5 To select the fan speed, press the button one or more times until the required setting is displayed. E-14 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 Select COOL mode by pressing the button. Notte You can select the Energy saving mode only in the COOL mode. Generating Anions E-15 ENGLISH The air conditioner can generate anions with an ionizer in the indoor unit. Since it is an additional function, you can select it any mode, even when the air conditioner is turned off. 1 Press the button. Result: The air conditioner generates anions. The indoor unit beeps. 2 If you wish to stop the Anions function, press the button again. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the direction of the air flow, refer to pages 16 and 17. Notte If you press the button during off, the air conditioner will turn on automatically and generate anions in the Fan mode with Low fan speed. Adjusting the Air Flow Direction Vertically E-16 Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the button one or more times as required. Result: The outer blade is adjusted vertically. RECOMMENDATION When... Adjust the blade to face... Cooling Upwards. 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the button again. Notte If you switch the air conditioner... Then the blade is... Off Closed completely. On again Set to the initial position powered. Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. E-17 ENGLISH Setting the On Timer If you press the button when the Off Timer is set, the Off Timer is also cancelled. Notte The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. To set the operating time, press the button one or more times until the...
Otros modelos de este manual:Los acondicionadores de aire - AS18PJGE7/FMC (6.09 mb)
Los acondicionadores de aire - AS18PJGE7/SIM (6.09 mb)
Los acondicionadores de aire - AS24P6GED7/CBM (6.09 mb)
Los acondicionadores de aire - AS12P4GBD/SET (6.09 mb)