Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
2 To select the DRY mode, press the Mode button until is displayed at the top of the wireless remote controller. Result: The indoor unit beeps. The air conditioner runs in DRY mode. N NNo oot tte ee You can change modes at any time. 3 To adjust the temperature, press the Temperature buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive. Result: Each time you press Temperature buttons: -The temperature is adjusted by 1OC. -The indoor unit beeps. The air conditioner starts removing the excess humidity. The quantity of air is adjusted automatically. N NNo oot tte ee In the dry mode, the fan speed is controlled automatically. 4 To control the direction of the air flow, refer to page 25. E-25 Airing Your Room If the atmosphere in your room is stale, you can air it using the FAN feature. Adjusting the Air Flow Direction Depending on the position of the indoor unit, you can adjust the position of the air flow blades, thus increasing the efficiency of the air conditioner. Press the Swing button. Result: The blades are moving between up and down. Result: The indoor unit beeps. 1 To stop the blades, press the Swing button again. To set to the required position, press the Swing button again. When the blades are in the required position. 2 IMPORTANT When the air conditioner is first turned on, the blades are moved. 4 To control the direction of the air flow, refer to below. You can also adjust by the hands the blades which are not operated by the swing button. Notte Select the fan speed by pressing the Fan button one or more times until the intended value is displayed: 3 Low Medium High To select the FAN mode, press the Mode button until is displayed at the top of the wired remote controller. Result: The indoor unit beeps. Result: The air conditioner runs in FAN mode. 2 Notte You can change modes at any time. If necessary, press (ON/OFF) button. Result: The On/Off indicator on the unit comes on. The air conditioner runs in the mode selected when the unit was last used. The indoor unit beeps. 1 ENGLISH E-26 Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the On Timer button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive. Result: Each time you press On Timer button: -The time is adjusted by 0.5 hour to 5 hours, by 1 hour from 6 hours to 24 hours. 2 Press the (Set/Cancel) button to complete the setting. Result: The remaining time is displayed. Blinking of the timer indicator stops. The selected mode and the temperature disappear on the display after 5 seconds. The air conditioner will switch on automatically when the counter displayed on the remote controller reaches the setting time as disappearing the On timer setting. N NNo oot t...
Otros modelos de este manual:Los acondicionadores de aire - ACH3600G (1.88 mb)
Los acondicionadores de aire - ACH4400G (1.88 mb)
Los acondicionadores de aire - CH18ZA (1.88 mb)
Los acondicionadores de aire - CH24ZA (1.88 mb)