Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Bacharach Tamaño del archivo: 1.08 mb Nombre del archivo: 4500624c-2744-44e7-8427-a1116c8c498f.pdf Idioma del manual:

A red light on top of the unit flashes whenever a process is complete or when the unit needs attention from the technician. The MAC2000 is ETL listed to UL standards and meets SAE specifications for recycled refrigerant. 1.1 Glossary of Terms A/C Air conditioner or air conditioning A/C System The vehicle’s air conditioning system Unit The MAC2000 itself Screen LCD Display Contaminated Refrigerant that has been mixed with some other type of refrigerant. 1.2 General Operating Guidelines • The MAC2000 monitors the AC line voltage and disables itself if the voltage drops below 100 VAC or rises above 135 VAC. An error message will be displayed on screen when the line voltage is out of tolerance. The unit must be turned OFF and then back ON to reset the voltage monitoring circuitry. Extension cords must be a minimum of 14 AWG and kept as short as possible. Common causes for electrical problems include: - Long extension cords - Faulty, overloaded electrical circuits - Drop lights - Improper ground or improper polarity • The screen shows options and gives instructions for most service and maintenance tasks. Read the on-screen prompts and follow their instructions. • The MAC2000 prompts a technician to check the system oil drain bottle on the side of the unit for recovered oil. Any system oil that is lost is automatically drained during recovery. A technician must measure and record the lost amount of oil in order to know how much new oil to add during charging. Refer to the A/C system manufacturer’s service manuals for oil specifications. Dispose of used oil properly. • In general, it is best to leave the MAC2000 turned ON throughout the workday. This allows the unit time to purge itself of air and refill the internal storage tank. Turn the unit OFF at the end of the day. 1.3 Component Location and Description MAC2000 Control Panel High Side Gauge – Shows the pressure in the high side of the vehicle’s A/C system. Low Side Gauge – Shows the pressure in the low side of the vehicle’s A/C system. LCD Display (Screen) – Displays all operational, error, and maintenance messages. Refrigerant Identifier Filter – Protects the refrigerant identifier sensor from contaminants. Printer – Provides a printed record of the functions performed by the MAC2000. The printer can print the record of the MAC2000’s last operation as well as other refrigerant management data and operational statistics. Start Key – Press to start a function. Pause/Reset Key – Press to either pause, reset, or abort a function and return the display to the Main menu. Enter Key – Press to accept a value as displayed on the screen. Weight Convert Key – Press to change the charge amount between pounds, pound & ounces, and kilograms. Pushing this key allows a technician to scroll through the different weight units. Arrow Keys – Use these keys to select variables and adjust values such as charge weight and vacuum time. The Increase and Decrease keys are used to adjust numerical values, while the Back, Forward, Left and Right keys are used to move between values displayed on the screen. F1 – F5 Function Keys – Use these keys to select various modes and functions on the MAC2000. A key’s current function is described directly above it on the screen. MAC2000 Front View MAC2000 Right-Side View MAC2000 Left-Side View MAC2000 Back View Closeup of MAC2000 Handle Panel Note: The auxiliary tank ports are not used as this time. Temperature and Velocity Data Ports Note: The communications ports are used for software updates and future options, and are not used during normal operation. 1.4 Using the Function Keys The operation of each function key (F1–F5) depends on the service operation and unit status. The display shows five labels along the bottom of the screen pointing to the function keys below. Each label shows the action the key will activate. To make a selection, press the function key immediately below the arrow. The Next menu function key takes the technician to the next set of menu items. There will always be a menu item to take the technician back to the main menu. 1.5 Using the Up/Down, Increase, Decrease, and Back/Forward Arrow Keys Pressing the Up/Down and Back/Forward keys moves the cursor on the screen in that direction. In addition, when entering numeric data, pressing the Increase key will increase the number, while pressing the Decrease key will decrease the number. Notes: 2 Initial Set-Up 2.1 Initial Set-Up Instructions WARNING It is extremely important to follow these instructions! Improper setup will result in potential inaccuracies when operating the unit. 1. Un-box the MAC2000. 2. Open the accessory box that contains the rear and side tray mats, the high- and low-side service hoses, the snap-shot transmitter, and one spare printer paper roll. 3. Drop the mats into the side and rear storage trays. 4. Attach the blue low-side service hose to the service-hose fitting with the blue label, and attach the red high-side service hose to the red service fitting...

Descargar ahora

Introduzca dos números de la imagen: