Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Safety instructions This appliance complies with the safety regulations and conditions in effect, and with the following: -Household appliance directive 89/336/CEE modified by directive 93/68/CEE -Low Voltage Directive 72/23/CEE modified by directive 93/68/CEE. • Check that the power supply voltage corresponds to that shown on the appliance (alternating current). • Given the diverse standards in effect, if the appliance is used in a country other than that in which it is purchased, have it checked by an approved service centre. • Do not place the appliance near a heat source or in a hot oven, as serious damage could result. • Use a flat and stable work surface, away from any water splashes. • Never leave the appliance in operation unattended. Keep away from children. • Do not leave the cord hanging. • Always plug the appliance into an earthed socket. • Do not unplug the appliance by pulling on the cord. • Do not use the appliance if: -the appliance or the cord is damaged. -the appliance has fallen or shows visible damage or does not work properly. In the event of the above, the appliance must be sent to the closest approved Service Centre. • If the power supply cable is damaged, it must be replaced by the manufacturer, the after-sales service or a similarly qualified person in order to avoid any risk. • Burns can occur by touching the hot surface of the appliance, the hot water, the steam or the food. • Always unplug the appliance: -immediately after use, -when moving it, -prior to any cleaning or maintenance. • Never immerse the appliance in water ! • Do not place the appliance near a wall or a closet - the steam produced by the appliance can cause damage. • Do not move the appliance when it is full of liquids or hot foods. • This appliance is designed for domestic use only. In case of professional use, inappropriate use or failure to comply loith the instructions, the manufacturer accepts no responsibility and the guarantee does not apply. 1. Lid handle 2. Lid (can be used upturned asa table mat) 3. Clip-it handle 4. Steam basket n°3 (depending on the model) 5. Removable grid with hooks andbuilt-in egg holder 6. Steam basket n°2 7. Steam basket n°1 8. Rice basket 9. Juice collector with built-in egg holder 10. Water inlet 11. Removable turbo ring 12. Water tank (1L capacity and 1-hour autonomy) 13. Inside maximum water level 14. Heating element 15. Exterior water level indicator 16. 60-minute timer 17. On/off light Preparation Do not immerse the water tank in water when cleaning. Keep away from any objects which could be damaged by the steam. Do not use seasoning or any other liquid other than water in the water tank. Make sure there is water in the tank prior to use. Check that the grid is always in basket n°1, placed on the juice collector. Prior to use • Using warm soapy water, wash all the removable parts and the inside of the water tank. • Rinse and dry. Preparing the steam cooker • Place the cooker on a stable surface. • Place the turbo ring around the heating element. Filling the water tank • There are two ways to fill the water tank: 1. Pour the water directly into the water tank, up to the maximum level, and pour the water into the turbo ring (fig. A). 2. Pour the water into the water tank through the water inlets, up to the maximum level (fig B). • Place the juice collector in the tank and adjust it properly. • Use fresh water with each use. Positioning the removable grids • The baskets have grids which can be removed to obtain a larger cooking space or to cook larger foods. • To position the grids: - Place the basket on the table. - Hold the grid right side up (hooks toward the bottom). - Centre the grid inside the basket. - Press on the hooks until the grid is locked into place. • For baskets n°2 and n°3 (depending on the model), make sure that the grid hooks are properly inserted. • To remove the grids, push up from underneath. 10 B A Wiring instructions UK only WARNING: Green This appliance must be earthed. E and yellow or green Important: the wires in this lead are coloured in accordance withthe following codes: Green and Yellow: Earth Blue or black Blue: Neutral Brown: Live N Connect the Green/Yellow wire to the terminal in the plug marked“ E ” (or by the earth symbol) or coloured Green or colouredGreen and Yellow. Connect the Brown wire to the terminal in the plug marked “ L ” or coloured Red. Connect the Blue wire to theterminal in the plug marked “ N ” or coloured Black. A 13 ampfuse should be fitted when the appliance is connected to a BS1363 plug. Seek professional advice if you are unsure of the correct procedure for the above. Voltage This appliance is designed to run on 230 - 240 volts AC only. Check that the mains supply corresponds to that shown on therating plate of the appliance. If the appliance is to be used in anycountry other than that of purchase, it should be checked by anapproved Service Dealer. Standards can vary from country to country. About your factory fitted plug (...