Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
1) A Motor unit B Bowl C Lid of bowl D Peg of lid (activates and deactivates the safety lock) E Projection (covers the opening in the handle) F Built-in safety lock G Blade . H Slicing/shredding disc (medium fine, double-sided) . I Emulsifying disc S J Kneading accessory © K Driving shaft L Chute M Pusher N Speed control O = Off 1 - 2 = variable speed control (1 = lowest speed; 2 = highest speed) M = Moment/Pulse button (appliance runs as long as button is pressed) O Cord clip (for fixing the cord when wrapped) P Screw cap (for closing the attaching hole for the blender jar when it is not used) Blender accessories ® Q Stopper R Lid S Blender jar T Rubber sealing ring U Knife unit Please contact your Philips dealer or an authorised Philips service centre • Never let the appliance run unattended. • Never let children run the appliance. • When you are mixing or blending liquids, do not exceed the maximum content indicated on the bowl or the blender (top line of the graduation). • Do not exceed the maximum amounts and processing times indicated in the table. • Wait until moving parts have stopped running before you remove the lid of the appliance. • Never put your fingers or objects (e.g. a spatula) in the chute while the appliance is running. Only the pusher is to be used for this purpose. • Never put your fingers or objects (e.g. a spatula) in the blender unless you have unplugged the appliance first. Please contact your Philips dealer or an authorised Philips service centre • Never let the appliance run unattended. • Never let children run the appliance. • When you are mixing or blending liquids, do not exceed the maximum content indicated on the bowl or the blender (top line of the graduation). • Do not exceed the maximum amounts and processing times indicated in the table. • Wait until moving parts have stopped running before you remove the lid of the appliance. • Never put your fingers or objects (e.g. a spatula) in the chute while the appliance is running. Only the pusher is to be used for this purpose. • Never put your fingers or objects (e.g. a spatula) in the blender unless you have unplugged the appliance first. Automatic cut-out Important Read these instructions carefully before you start using the appliance To prevent damage due to overheating, your appliance has been equipped with an automatic cut-out system. In case of overheating, this system will automatically cut off the power supply to the appliance. If you follow the instructions below, you can switch on the appliance again after you have let it cool down for 15 minutes. If your appliance suddenly stops running: -Pull the mains plug out of the socket -Set the switch to position O -Let the appliance cool down for 15 minutes -Put the mains plug back in the socket -Switch on the appliance again. if the automatic cut-out system is activated time and again. • Read the directions for use and look at the illustrations before you start using the appliance. • Remove the protective cover from the blade each time you use it. • Be very careful when you pick up the blade, the knife of the blender and the slicing/grating disc. They are very sharp! • Thoroughly clean the parts that will come into contact with food before you use the appliance for the first time. • Place the lid on the bowl in the right position. The built-in safety lock will now be deblocked and you will be able to turn on the appliance. • Note that if both the blender and the bowl have been correctly mounted, only the blender will function. • Never immerse the motor unit in water or any other liquid. Do not rinse it either. • Unplug the appliance after use. • If the mains cord of this appliance is damaged, it must always be replaced by Philips or a service centre authorised by Philips, in order to avoid hazardous situations. • Keep these directions for use for future reference. 4 1 2 CLICK 2 3 CLICK 4 CLICK 5 CLICK 6 7 8 9 Placing the bowl (B) (fig. 2) -Put the bowl on the food processor as shown (1) -Turn the handle in the direction of the arrow until the bowl cannot be moved any further and you hear a ‘click’ (2). Placing the lid (C) -Put the lid on the bowl as shown in fig. 3. -Turn the lid with some force in the direction of the arrow until the lid will not move any further and you hear a ‘click’ (fig. 4-5). -Make sure that the mark on the lid and the arrow on the bowl are directly opposite each other. The projection of the lid will now cover the opening in the handle of the bowl (fig. 6). Chute (L) and pusher (M) • The chute can be used to add liquid and solid ingredients (fig. 7). • Use the pusher to push ingredients through the chute (fig. 8). • You can also use the pusher to close the chute while the appliance is running to prevent dust or drops of liquid from escaping through the chute (fig. 9). Built-in safety lock (F) The motor unit as well as the lid (C) have been provided with marks. The appliance will only function if the arrow on the motor unit is placed directly opposite t...
Otros modelos de este manual:Los procesadores de alimentos - HR7723/00 (3.23 mb)