Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 3.27 mb Nombre del archivo: Idioma del manual:

3. -Turn the lid with some force in the direction of the arrow until the lid will not move any further and you hear a ‘click’ (fig. 4-5). -Make sure that the mark on the lid and the arrow on the bowl are directly opposite each other. The projection of the lid will now cover the opening in the handle of the bowl (fig. 6). Chute (L) and pusher (M) • The chute can be used to add liquid and solid ingredients (fig. 7). • Use the pusher to push ingredients through the chute (fig. 8). • You can also use the pusher to close the chute while the appliance is running to prevent dust or drops of liquid from escaping through the chute (fig. 9). Built-in safety lock (F) The motor unit as well as the lid (C) have been provided with marks. The appliance will only function if the arrow on the motor unit is placed directly opposite the mark on the lid. In this position, the projection (E) of the lid will cover the opening in the handle of the bowl. How to use the appliance Note: The appliance will only function if • The screw cap (P) or the blender (Q-U) have been properly mounted onto the motor unit (A) and • The bowl (B) and the lid (C) have been placed on the motor unit in accordance with the instructions in this booklet. • If both the blender and the bowl have been mounted correctly onto the motor unit, only the blender will function. Set the speed control (N) to the position indicated in the table on pages 8-10 and switch the appliance on. When you have doubts about the right speed, always select the highest speed (setting 2). 5 1 2 CLICK 2 3 CLICK 4 CLICK 5 CLICK 6 7 8 9 Placing the bowl (B) (fig. 2) -Put the bowl on the food processor as shown (1) -Turn the handle in the direction of the arrow until the bowl cannot be moved any further and you hear a ‘click’ (2). Placing the lid (C) -Put the lid on the bowl as shown in fig. 3. -Turn the lid with some force in the direction of the arrow until the lid will not move any further and you hear a ‘click’ (fig. 4-5). -Make sure that the mark on the lid and the arrow on the bowl are directly opposite each other. The projection of the lid will now cover the opening in the handle of the bowl (fig. 6). Chute (L) and pusher (M) • The chute can be used to add liquid and solid ingredients (fig. 7). • Use the pusher to push ingredients through the chute (fig. 8). • You can also use the pusher to close the chute while the appliance is running to prevent dust or drops of liquid from escaping through the chute (fig. 9). Built-in safety lock (F) The motor unit as well as the lid (C) have been provided with marks. The appliance will only function if the arrow on the motor unit is placed directly opposite the mark on the lid. In this position, the projection (E) of the lid will cover the opening in the handle of the bowl. How to use the appliance Note: The appliance will only function if • The screw cap (P) or the blender (Q-U) have been properly mounted onto the motor unit (A) and • The bowl (B) and the lid (C) have been placed on the motor unit in accordance with the instructions in this booklet. • If both the blender and the bowl have been mounted correctly onto the motor unit, only the blender will function. Set the speed control (N) to the position indicated in the table on pages 8-10 and switch the appliance on. When you have doubts about the right speed, always select the highest speed (setting 2). 5 10 11 12 Blade (G) . Be careful: the cutting edges of the blade are very sharp! • The blade can be used for chopping, mixing, blending, pureeing and preparing puff pastry, crumble and shortcrust pastry. -Remove the protective cover from the blade (fig. 10). -Put the bowl on the motor unit (fig. 2) and fit the blade onto the driving shaft (fig. 11). -Put the ingredients in the bowl (fig. 12). -Fasten the lid onto the bowl and put the pusher in the chute. -Set the speed control (N) to the position indicated in the table and switch the appliance on. If you have doubts about the correct speed, always select the highest speed (position 2). • Applications/recipes, mentioned in the table, will be ready after 10-60 seconds. Tips: • It is better not to chop large chunks with the blade; pre-cut them into pieces of approximately 3 cm before putting them in the food processor. • The appliance chops very quickly; let it run for short periods at a time, also when you are using the pulse setting (M), to prevent the food from becoming too finely chopped. • Do not let the appliance run for too long when you are chopping (hard) cheese; the cheese will get too hot and will start to melt and become lumpy. • If food sticks to the blade or to the inside of the bowl: - turn the appliance off; - remove the lid from the bowl; - remove the ingredients from the blade or the inside of the bowl with a spatula. • Do not chop very hard ingredients like coffee beans, nutmeg and ice cubes. They could cause the blade to get blunt. Check the table for the appropriate speed and setting. Slicing/grating disc (H) . Be caref...

Descargar ahora

Introduzca dos números de la imagen: