Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
. . . . . . . . . . . . . . . . . . . . . . . . . . 45 5.8 CLOSING RA-2400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 SOFTWARE DESCRIPTION What is the RA-2400 Remote Access Software? The RA-2400 Remote Access software is a communications program designed to work with Linear’s DVS Supervised Wireless Security Systems and other Linear products. The software runs on an IBM PC or compatible computer and connects to the console through the standard telephone network, or to the Console directly, with the computer’s modem. This 32-bit software runs under all Windows operating systems. RA-2400 sets the options for: Console access codes, exit/entry delays, alarm, audio, and sensors; communicator telephone numbers, call routing, formats, reporting codes, account numbers, and other options. The RA-2400 software has a large help file that can be accessed at any time by selecting “Contents” from the “Help” menu or by pressing the F1 key. How does RA-2400 connect to a DVS Console? Remote Access communicates with the Console over the same phone line the Console uses to send communicator reports. Remote Access can also connect to the Console without a telephone line by directly connecting the Computer modem’s LINE jack to the Console’s T & R Terminals using a telephone cord. With a telephone line connection (remote connection), a special dialing procedure is used. First, Remote Access dials the phone number specified for the Console. Remote Access waits long enough for the phone to ring two or three times, then hangs up. Next, Remote Access waits, then dials again. This second call is answered on the first ring by the Console. With a direct connection (local cable connection), Remote Access prompts the user to place the Console in Test Mode and press the Console’s EMERGENCY button to establish the connection. Once the connection is made, the Console will check if its remote access password matches the calling software’s password. If the passwords match, access is granted. Do I have to be connected to a Console to make programming changes? Since Remote Access knows the programming structure, you can modify an Account Profile without being connected to a Console. This means you can set all of the values for a specific Console configuration and then connect to a unit and send all of the values that you have set. This is referred to as off-line Console confi guration. How do I change Console settings while on-line? While on-line with the Console, make any changes to the Account Profile then send the data to change the Console. Can I make a template with the typical settings for all of my accounts? Programming “templates” can be created to speed up programming multiple Consoles. Common settings, such as the Central Station telephone number, communicator format, Console and communicator configurations which are shared by all of your accounts can be stored in an Account Profile and used as a template. That template file can be used as a basis for creating each customer Account Profile file. See “Using Profile Copies” in the Help contents for more information on creating a template. How do I add and remove the program’s password? A password can be set to restrict the RA-2400 to authorized users only. To add a password, select “Change Password...” from the “Options” menu. Enter the password in the “New Password” field. Verify it by entering the password again in “Re-type New Password” and click OK. To remove the password, enter your password in “Old Password”, don’t enter anything on the “New Password” and “Re-type New Password” fields and press OK. 1.2 SYSTEM REQUIREMENTS Minimum System Requirements: IBM compatible 486 personal computer with 8 Mb RAM Windows 95/98/NT/ME/XP/2000 operating systems VGA monitor Name brand modem that is capable of 300 baud (BELL 103 compatible) Hard disk drive with 10 Mb available space for the software plus 18K available space for each Account Profile file. CD drive Recommended System: Pentium or better based personal computer with 16 Mb RAM or more Windows 95/98/NT/ME/XP/2000 operating systems SVGA video card Microsoft compatible mouse Name brand modem that is capable of 300 baud (BELL 103 compatible) Large hard disk drive (1000 Account Profiles use about 20 Mb) CD drive Compatible Systems Note: The software described in this manual supports the programming of a variety of models of Linear’s Wireless Security Systems. References in these instructions are focused on the Model DVS-2400. The programming differences for the other models supported by this software are: DVS-1200: This model is identical to the DVS-2400 with the limitation of supporting only 12 sensors. Only the first 12 sensors can be programmed in Sections 4.9, 4.13.1, and 4.13.2. DVS-2408/DUAL-824: This model programs the same as the DVS-2400 with the addition of supporting 8 hardwired loops. Hardwired loop programming is described in Section 4.9. PERS-2400: This model is not a Securi...
Otros modelos de este manual:Los procesadores de alimentos - REMOTE ACCESS SOFTWARE DVS-1200 (781.02 kb)
Los procesadores de alimentos - REMOTE ACCESS SOFTWARE DVS-2400 (781.02 kb)
Los procesadores de alimentos - REMOTE ACCESS SOFTWARE DVS-2408 (781.02 kb)
Los procesadores de alimentos - REMOTE ACCESS SOFTWARE RA-2400 (781.02 kb)