Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Your safety, as well as the safety of others, is important to General Binding Corporation. This section contains important safety information which must be adhered to while operating, cleaning and performing basic maintenance in and around the machine. 1.1 Explanation of symbols INFORMATION: [This symbol is used prior to, during and/ or after a step. Following this symbol is important information pertaining to current subject.] CAUTION: [This symbol is used prior to a step. The information following this symbol is to inform you of how to avoid harm to you and others around you} WARNING: [This symbol is used prior to a step. The information following this symbol is to inform you of how to avoid a dangerous situation.] ELECTRICAL HAZARD: [This symbol is used prior to a step. The information following this symbol is to prevent an electrical shock condition that may be caused by an operators action or machine function.] 1.2 General rules of safety ELECTRICAL HAZARD: Do not operate the laminator if power cord is damaged or frayed. You can be severely shocked, electrocuted or cause a fire. WARNING: Do not operate this laminator if you are not physically, psychologically or emotionally fit. Do not operate this machine until you have been trained and read this manual in it’s entirety. WARNING: Do not wear ties, loose fitting clothes or dangling jewelry while operating or servicing the laminator. These items can get caught in the nip and choke you or you can be crushed or burned. WARNING: Never tamper with the safety devices to increase the laminator’s production capacity. In the event a safety device should fail, never attempt to bypass it for operation. Consult a service representative immediately. © 2004 General Binding Corporation Page 1-1 Polaris II Operations Manual WARNING: Never use this machine for any other purpose than its intended design and function. CAUTION: Do not make any modifications to this laminator. Unauthorized changes will void your warranty and may cause extensive repairs or create poor output quality. WARNING: Do not attempt to repair or service the laminator. Disconnect the plug from the power receptacle and contact your local sales/ service representative. CAUTION: Only use acceptable materials through this laminator. Unacceptable materials may cause damage to the rollers or cause poor output quality. CAUTION: Always observe all warning labels placed at various points on the laminator. If you do not completely understand a label, contact your local service representative for further explanation. CAUTION: When moving the laminator, avoid quick stops, excessive force and uneven floor surfaces. INFORMATION: Always disconnect the power plug from the receptacle to which it is connected and keep the power supply cord in your possession when moving the laminator. INFORMATION: Any concerns for safety or operation should be brought to the attention of your local service representative immediately. CAUTION: Avoid contact with the heat roller during operation or shortly after power has been removed from the laminator. Page 1-2 © 2004 General Binding Corporation © 2004 General Binding Corporation Page 1-3 Operations Manual Polaris II 1.3 Labels Safety warning labels are placed at various locations on the laminator. Do not remove any of these labels. They are placed for your safety as well as the safety of those working around you. Below are illustrations of the safety labels and a description of their meanings. Hot rollers – The safety labels below mean that you could be burned and your fingers and hands could be trapped and crushed in the rollers. Jewelry and long hair could be caught in the rollers and you could be pulled into them. One of each label is placed on each side from the front operating position just in front of the heat rollers nip. Electrical hazard – The safety label below means that you could be seriously hurt or killed if you open the product and expose yourself to hazardous voltage. This label is located on the rear panel in the center of the laminator just below the film supply shaft between the pull rollers and decurling bar. - The safety label below means that you should always replace a fuse with the same size and type of fuse. This will reduce the risk of fire. This label is located on the side cover near the fuse panel located on the rear of the machine. Pinch point – The safety label below means use extreme caution when placing your hands in the proximity of the pull rollers nip. You should never place your fingers or other items in this area while the machine is running. This label is located between the pull rollers and the decurling bar center of the rollers. Page 1-4 © 2004 General Binding Corporation Polaris II Operations Manual – The safety label below means that you could be seriously injured if you come in contact with the moving chain and sprockets of the drive system. This label is located near all drive sprockets on the machine. Sharp knife – The safety label below...