Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Before using it for the first time, please take a few minutes to read this guide. We hope this enables you to bind documents easily. For other great tools and tips, please visit us at Safety Tips In order to avoid overloading, this machine can punch a maximum of 25 sheets at one time. Do not punch metal objects such as staples or paper clips. Empty the waste tray regularly. Make sure the machine is operated on a flat stable surface. Never lift the machine by the punching handle (Fig.1). Always use the hand grips located on the side of the machine (Fig.2). Safety Tips for the GBC C450E Only Do not block air intakes and outlets. Do not use the machine if the power cord is damaged. Do not place the power cord where it may be tripped over or pulled. Make sure that it does not come into contact with hot surfaces such as pipes or radiators. Make sure the cable is not crushed or pinched. Do not use an extension cord unless absolutely necessary. Do not leave the C450E connected to the electrical outlet when not in use. Do not immerse the C450E in water or other liquids. Doing so will result in electric shock. Do not attempt to disassemble the C450E. Unpacking Your machine is ready to use when removed from the box. Retain the packaging in case you need to return the machine for repair. The punching mechanism is coated with a protective film of lubricant which will mark your paper. Clean this by punching scrap paper until clean prior to binding. Setting Up the C450E Connect the C450E to the electric outlet using the power cord supplied. Turn on using the ON / OFF switch located at the rear of the C450E. Wait while the C450E goes through an automatic check procedure and both LEDs light up before using. When complete, the green LED will remain On, and the C450E is ready for operation. WARNING: The C450E must be grounded. If in doubt, consult a qualified electrician. Troubleshooting C450E This machine is designed to finish 5 bound documents per minute, up to a maximum of operating for 30 minutes on and for 30 minutes off. This machine has a thermal overload safety feature. If the motor overheats, this safety feature activates and will prevent the machine from punching until it has cooled sufficiently. The thermal overload switch will automatically reset after approximately 15 minutes of rest. Selecting the CombBind® Spine Size Lift the lid and punch handle to the upright position. Place entire document so it rests on the lid. Check the CombBind® spine size needed by using the paper thickness guide. Sorting the Paper For large documents, use the document separator. Place the stack of paper to be punched on the top shelf against the opened top cover lid. Push the separator into the stack of paper and push down on the lever. This will lift an appropriate stack of 25 sheets maximum for easy punching (Fig. 3). Continue this procedure until all of the paper is punched. Punching the Paper For the C340, always make sure that the punch handle is in the upright position before centering the paper. Load the first paper stack into the punch slot. C...
Otros modelos de este manual:Laminador - C450E (1.36 mb)