Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Only use attachments/accessories specified by the manufacturer. Use of attachments/ accessories not recommended by the product manufacturer may cause hazards. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug the apparatus during lightning storms or when unused for long periods of time. If the set will not be used for a long time, remove all the batteries to prevent potential damage due to possible battery leakage. There is a strong magnet inside the radio. Keep credit cards, recorded tapes, watches, etc. away from the radio, especially the speaker. Do not drop the radio or subject it to strong impacts. Do not use this apparatus near water, and no objects filled with liquids, such as vases, shall be placed on the apparatus. Refer all servicing to authorized service personnel. For recycling or disposal information about this product, please contact your local authorities or the Electronics Industries Alliance: - POWER SOURCE BATTERY OPERATION . Open the battery cover. . Insert “D” size (UM- or equivalent) batteries into the battery compartment, making sure that the batteries are installed with the proper polarities (“+” and “-”). TO PREVENT POSSIBLE DAMAGE TO THIS UNIT . Load new batteries with their polarities (“+” and “-”) aligned correctly. . If the radio will not be used for a long time, remove all of the batteries, and store them in a cool and dry place. . Remove dead batteries immediately and properly dispose of them. 4. Do not use old and new or different types of batteries (e.g., alkaline and manganese) together. BATTERY LIFE If the sound becomes low or distorted, replace all of the batteries with new ones. TO USE AC HOUSE CURRENT Plug the AC cord into the AC cord socket located on the rear of the radio, and the other end into an AC wall outlet. RADIO OPERATION . Set the hold switch off (slide up). . Press the power button to turn on the radio. . Adjust the volume by turning the volume control dial. 4. Select the preferred frequency band (AM/FM/TV/NOAA) by pressing the BAND / ALERT button. The selected band will appear on the display. 5. Press the light button to turn the backlight on for about 8 seconds. . Use the TUNING DOWN / UP buttons or the NUMBER buttons to tune to a station. The frequency will be displayed on the LCD. Please see page 4 (TUNING) for more information. 7. Press and hold the TIME button to switch from FM stereo mode to FM mono mode. 8. Press the TIME button once to show the time. Press it again to display the time for alarm . Press it again to display the time for alarm . Press it again to display the frequency. The radio will automatically return to displaying the frequency after 5 seconds. 9. Adjust the antenna. See page 5. 0.Press the power button to off the radio. .Before turning the radio off, set the NOAAband to your local NOAAfrequency. When the radio is off, press the BAND / ALERT button to turn on the NOAA alert function. NOAA will be shown on the bottom right of the LCD. When there is a NOAA alert, the radio alarm will sound, the light will turn on and the radio will turn on to the NOAA band. - TUNING AUTOMATIC TUNING Press and hold the TUNING DOWN / UP button to tune to the previous / next station. MANUAL TUNING Press the TUNING DOWN / UP button to change the frequency down / up by one step. DIRECT TUNING Use Direct Tuning to enter a specific station frequency to tune to directly. In the AM/FM mode, press the ENTER button to enter the direct tuning mode. Press the NUMBER buttons to enter the desired frequency, and press the ENTER button. TUNING TO STORED STATIONS You can store 0 radio stations: 0 for AM and 0 for FM. HOW TO STORE A RADIO STATION . Select the frequency band and tune to the desired station. . To store the radio station, press the TIME SET / MEMORY button. “MEMO” will appear on the bottom right of the LCD and flash. Press a number button, and press the TIME SET / MEMORY button to store the radio station. The preset number will be displayed on the right of the LCD. . To select a stored station, select the frequency band, and press a number button. The radio will go to the stored station, and the preset number and the frequency are shown on the display. CLOCK SHOWING THE CLOCK When the radio is off, the time is displayed on the LCD. When the radio is on, the frequency is displayed. Press the TIME button to display the time. Press it again to display the alarm time. Press it again to display the alarm time. Press once more to display the frequency. SETTING THE TIME When the radio is off, press the TIME SET / MEMORY button, and the time will flash. Press the HOUR and MIN. buttons to adjust the time. Ensure that the AM/PM is set correctly. SLEEP TIMER When the radio is on, press the SLEEP button. “90” will be displayed on the top right corner of the LCD and “SLEEP” will ap...