Votos - , Puntuación media:
(
)
)
Fabricar: Harbor Freight Tools
Tamaño del archivo: 117.54 kb
Nombre del archivo: 41146.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
Back off the screw until its head rests on the stopper on the opposite handle. Back off the screw 1/6th of a turn at a time and hold tool to the light, observing result of gap setting. 3. To verify the gap, place a sheet of paper between the jaws and fully close the handles. The jaws should hold the paper in place. Hold the screw in place and tighten the lock nut. DO NOT OVER TIGHTEN the nut. AWARNING To prevent serious injury: 1.Wear ANSI-approved safety goggles during use. 2.Never use on live electrical circuits. 3. Keep fingers clear of sharp blades. 4.Keep out of children’s reach. Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 _Visit our website at: A Read this material before using this product. Failure to do so can result in serious injury. _SAVE THESE INSTRUCTIONS._ Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353....