Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
. . . . . . . . . . . . . . . 3 A0250IVZ.fm 2 3 ENGLISH 1. Scope of delivery 1 3 2 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 16 22 23 24 26 25 27 28 29 30 31 32 1 Table insert 2 Riving knife 3 Blade guard 4 Saw blade 5 Suction hose 6 Handle for push block 7 Push stick / feeding aid 8 Hose carrier 9 Rip fence extrusion / rip fence 10 Rip fence 11 Table top 12 Guide extrusion / rip fence 13 Guide bar / mitre fence 14 Stanchion, short (2x) 15 Stanchion, long (2x) 16 Leg (4x) 17 Handwheel / blade tilt 18 Handwheel / blade rise and fall 19 Chipcase guide panel, front 20 Bearing plate, front 21 Threaded rod 22 Pinion shaft 23 Setting tube 24 Motor carrier unit 25 Dust extraction port 26 Chipcase 27 Cover 28 Bearing plate, rear 29 Chipcase guide panel, rear 30 Fence carrier, lower / mitre fence 31 Fence carrier, upper / mitre fence 32 Mitre fence extrusion – Assembly wrench – Hardware bag XA0034AUS1.fm Operating Instruction ENGLISH 4 ENGLISH 2. Machine overview 35 36 37 38 39 40 41 42 33 34 33 Saw blade .315 mm 34 Rip fence 35 Table top of galvanized steel plate – high stability under load and permanent protection against corrosion 36 Handwheel for setting the depth of cut steplessly from 0 – 85 mm 37 Handwheel for stepless blade tilt setting from 90° through 45° 38 Lock lever for locking the blade tilt angle 39 ON/OFF switch 40 Stand with multiple reinforcement beads for high stability 41 Mitre fence 42 Maintenance-free induction motor ENGLISH Table of Contents 1. Scope of delivery........................3 2. Machine overview.......................4 3. Please read first!.........................5 4. Safety instructions .....................5 4.1 Specified conditions of use...........5 4.2 General safety instructions...........5 4.3 Symbols used throughout these instructions..........................6 4.4 Safety devices ..............................6 5. Special product features............6 6. Operating elements....................6 7. Assembly.....................................7 7.1 Mains connection........................13 7.2 Installation...................................13 8. Operation...................................13 8.1 Dust collector..............................13 8.2 Setting the depth of cut...............14 8.3 Setting the saw blade tilt.............14 8.4 Sawing with the rip fence............14 8.5 Sawing with the mitre fence........15 9. Tips and tricks ..........................15 10. Care and maintenance .............15 10.1Saw blade change......................15 10.2 Cleaning the saw blade's height adjustment mechanism....15 10.3 Saw storage................................16 10.4 Maintenance...............................16 11. Repairs.......................................16 12. Transportation ..........................16 13. Available accessories .........16/19 14. Technical specifications..........17 3. Please read first! • Assemble tool in strict accordance with these instructions. Only if you follow the instructions exactly does the machine conform to the safety regulations and can be safely operated. • Read the safety instructions before initial operation. • If you notice transport damage while unpacking, notify your supplier immediately. In this case, do not assemble and operate the saw! • Dispose of the packing in an environmentally friendly manner. Take to a proper collecting point. • Keep these instructions for reference on any issues you may be uncertain about. • If you lend or sell this machine be sure to have these instructions go with it. 4. Safety instructions 4.1 Specified conditions of use This machine is intended to rip and crosscut grown timber, faced boards, chip board and wood-core plywood sheets, and similar wood-derived materials. Do not cut round stock without suitable jigs or fixtures. The rotating saw blade could turn the workpiece. Any other use is considered to be not as specified and not permitted. The manufacturer is not liable for any damage caused by unspecified use. Modification of the machine or use of parts not approved by the equipment manufacturer can cause unforeseeable damage! 4.2 General safety instructions When using this tool observe the following safety instructions, to exclude the risk of personal injury or material damage. Please also observe the special safety instructions in the respective chapters; where applicable, follow the legal directives or regulations for the prevention of accidents pertaining to the use of circular saws. A General hazards! Keep your work area tidy – a messy work area invites accidents. Be alert. Know what you are doing. Set out to work with reason. Do not operate tool while under the influence of drugs, alcohol or medication. Consider environmental effects: provide proper lighting. Prevent adverse body positions. Ensure firm footing and keep your balance at all times. Use suitable workpiece supports when cutting long stock. Do not operate tool near inflammable liquids or gases. The saw shall only be started and ope...