Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
Text entry commands take the form of 2 ASCII characters, in some cases followed by a signed argument (‘nn' below). All characters are echoed by the processor. A carriage return character will execute the command, and backspace is also implemented. When the ‘display' command is executed, the product will display the text on its front panel and OSD (aswell as returning it on RS232), 12 characters for the 561 & 568, 20 characters for the 861. Operation. Text entry consists of four commands; • Enter text to buffer • Modify text in buffer • Display text • Clear text from buffer 1. Enter text TExxxx, where xxxx are four ASCII characters. 2. Display text TDnn, where nn indicates how long the display should be on for, in multiples of 0.5 seconds, up to a maximum of 6 seconds. 3. Modify text TPnn sets the text entry point for the next string of four characters. 4. Clear text Entering TC clears any text held in the buffer. It also resets the text entry point to the first character. e.g. TCJ TEDoorJ TE belJ TEl J TD12J Displays “Door bell “ for 6 seconds. This could be sent repeatedly for a shorter period (e.g. TD2), to flash the text on the OSD. BOOTH ROYD STUART /MERIDIAN Meridian Audio Limited, Stonehill, Stukeley Meadows, Huntingdon, Cambs PE29 6EX Tel +44 1480 52144 Fax +44 1480 459934 http://www.meridian-audio.com/...
Otros modelos de este manual:equipamiento barco - 568 (6.86 kb)