Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
MOUNTING..................................... 1-1 1.1 Antenna Unit.................................1-1 1.2 Monitor Unit..................................1-6 1.3 Control Unit................................1-10 1.4 Processor Unit............................1-15 2. WIRING........................................2-1 2.1 Interconnection.............................2-1 2.2 Antenna Unit.................................2-2 2.3 Monitor Unit..................................2-6 2.4 Processor Unit..............................2-7 2.5 Changing AC Power Specification of Processor Unit ..........................2-12 3. SETTING AND ADJUSTMENT .... 3-1 3.1 DIP Switch Setting .......................3-1 3.2 Initializing Tuning..........................3-2 3.3 Heading Alignment.......................3-3 3.4 Adjustment Sweep Timing............3-6 3.5 Suppressing Main Bang...................3-7 3.6 Other Settings..............................3-8 3.7 Dual Radar Display (non IMO-type only)..................3-16 4. INSTALLING OPTIONAL EQUIPMENT................................ 4-1 4.1 Gyro Converter GC-10.................4-1 4.2 Memory Card Interface Unit..............4-9 4.3 DVI-RGB Conversion Kit (for VDR connection) ..................4-12 4.4 Performance Monitor PM-31......4-15 4.5 BNC Connector Converter.........4-17 4.6 Junction Box...............................4-18 5. INPUT/OUTPUT DATA ................ 5-1 INSTALLATION MATERIALS, ACCESSORIES,SPARE PARTS ........ A-1 OUTLINE DRAWINGS ......................D-1 INTERCONNECTION DIAGRAMS ... S-1 All brand and product names are trademarks, registered trademarks or service marks of their respective holders. The paper used in this manual is elemental chlorine free. .FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 A :JAN.2004 Printed in Japan All rights reserved. L :FEB.04, 2011 Pub. No. IME-35190-L (HIMA ) FAR-2117/27/2817/27 *00014745419* *00014745419**00014745419* * **00014745419 0001474541900014745419* ** * 0 0 0 1 4 7 4 5 4 1 9 * SAFETY INSTRUCTIONS The operator and installer must read the applicable safety instructions before attempting to install or operate the equipment. DANGER Indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation which, if not avoided, can result in minor or moderate injury. Mandatory Action Prohibitive Action Warning, Caution DANGER Wear a safety belt and hard hat when working on the antenna unit. Serious injury or death can result if someone falls from the radar antenna mast. WARNING Radio Frequency Radiation Hazard The radar antenna emits electromagnetic radio frequency (RF) energy which can be harmful, particularly to your eyes. Never look directly into the antenna aperture from a close distance while the radar ius in operation or eexpose yourself to the transmitting antenna at a close distance. Distances at which RF radiation level of 100, 50 and 10 W/m are given in the table below. Note: If the antenna unit is installed at a close distance in front of the wheel house, your administration may require halt of transmission within a certain sector of antenna revolution. This is possible. Ask your FURUNO representive or dealer to provide this feature. * : XN12AF: 4 ft, XN20AF: 6.5 ft, XN24AF: 8 ft Model Transceiver Magnetron Antenna 100W/m2 50W/m2 10W/m2 XN-12AF 0.3 m 1.2m 3.7 m XN-20AF 0.1 m 0.7 m 2.2 m XN-24AF 0.1 m 0.4 m 1.5 m XN-12AF 0.9 m 2.6 m 9.0 m XN-20AF 0.5 m 1.7 m 4.6 m XN-24AF 0.2 m 1.0 m 3.3 m MG4010/ MAF1425B RTR-078 (X-12 kw) FAR-2817/2117 FAR-2827/2127 RTR-079 (X-25 kw) MG5436 2 *1 i WARNING Do not open the equipment unless totally familiar with electrical circuits and service manual. Only qualified personnel should work inside the equipment. ELECTRICAL SHOCK HAZARD Construct a suitable service platform from which to install the antenna unit. Serious injury or death can result if someone falls from the radar antenna mast. Turn off the power at the mains switchboard before beginning the installation. Fire, electrical shock or serious injury can result if the power is left on or is applied while the equipment is being installed. Be sure that the power supply is compatible with the voltage rating of the equipment. Connection of an incorrect power supply can cause fire or damage the equipment . Fire or damage to the equipment can result if a different cable is used. Use only the specified power cable. Do not install the monitor unit, processor unit or control unit where they may get wet from rain or water splash. Water in the units can result in fire, electrical shock, or damage the equipment. Attach securely protective earth to the ship's body. The protective earth (grounding) is required to the AC power supply to preve...
Otros modelos de este manual:equipamiento barco - 2127-BB (5.81 mb)