Votos - 0, Puntuación media: 4
(
)
)
|
Resumen del manual
What’s Included CB Radio Microphone Holder Mounting Bracket 5mm Machine Screw (2) 3mm Machine Screw (2) 5mm Self-tapping Screw (2) 3mm Self-tapping Screw (2) Spring Washer (2 big + 4 small) Plain Washer (2 big + 4 small) Nut (2 big + 2 small) Mounting Knob (2) Rubber Washer (2) User’s Guide Contents Contents Product Features.........................................................................3 Setup.......................................................................................... 4 Attaching the Microphone Holder.....................................................4 Mounting the Transceiver...................................................................5 Connecting an Antenna......................................................................6 Connecting the Microphone ..............................................................7 Connecting an External Speaker ......................................................7 Using Vehicle Battery Power..............................................................8 Using the Transceiver ............................................................................... 8 Operation.................................................................................... 9 Receiving Transmissions and Adjusting Squelch...........................9 Transmitting.........................................................................................9 Selecting the Emergency Channel ...................................................9 Operational Hints ............................................................................. 10 Common Uses for CB Radios.................................................................10 Transmission Courtesy ............................................................................10 Using Common 10-Codes ............................................................... 10 Maximum Range.............................................................................. 11 Additional Information............................................................... 12 Troubleshooting................................................................................ 12 Reducing Noise ................................................................................ 12 Care and Service..............................................................................13 Replacing the Fuse .......................................................................... 13 ........................V ................................................................................... 14 RF Emissions Information .............................................................. 15 Limited Warranty ............................................................................. 16 2 Product Features Product Features Product Features VOLUME Rotate to increase or decrease the speaker volume. TX / RX Shows when the radio is transmitting (TX), or receiving (RX). Other Features Push to Talk (PTT) Microphone Channel Display Shows the current channel. CHANNEL Rotate to select frequency. OUT CH9 CH19 Switch to move between standard frequencies and emergency channels. SQUELCH Rotate to adjust the amount of background noise. Full Legal Power – gives you the greatest available range. Automatic Noise Limiter – reduces impulse-type noises while receiving. External Speaker Jack – provides a connection for an external speaker. Phase-Locked Loop (PLL) Frequency Synthesizer – provides highly accurate and stable tuning. Two Built-In Ceramic Filters – ensure superior channel selectivity and freedom from adjacent channel interference. Automatic Modulation Control – prevents the transmitter signal from over- modulating and distorting. 3 Setup Setup Setup Attaching the Microphone Holder You can attach the microphone holder to either side of the transceiver or to another location in your vehicle. To attach the holder to either side of the transceiver, secure the holder to the side using the supplied 3mm self-tapping screws, and spring washers. 3mm self-tapping Spring washer screw Holder To attach the holder to another location in the vehicle, such as the dashboard, follow these steps. 1. Using the holder as a template, mark the positions for the mounting screw holes at the desired location. 2. At each marked position, drill a hole slightly smaller than the supplied mounting screws. 3. Attach the holder at the mounting location using the supplied 3mm machine screws, spring washers, plain washers, and nuts. Note: If you cannot reach behind the mounting surface to attach the nuts on the machine screws, use the supplied 3mm plain washers and self-tapping screws. 4 Setup Setup Mounting the Transceiver Cautions: • If you use this CB in a vehicle, mount it securely to avoid damage to the CB or vehicle, or injury to anyone in the vehicle during sudden starts or stops. • Do not mount the CB where it could damage or interfere with the operation of any passive restraint safety device (an airbag or seat belt). ...