Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
1. To customize system options on the GMI 10, from the instrument screen, select Menu > Setup > System. 2. For the listed options, select the appropriate settings or enter the necessary values. For example, you can select units of measure, language, enter total fuel capacity, and so on. To set the reference used to calculate heading information: 1. From the instrument screen, select Menu > Setup > System > Heading. 2. Choose from the following options: • Auto Magnetic—Automatic Magnetic Variation automatically sets the magnetic declination for your acquired GPS position. • True—sets true north as the heading reference. • User Magnetic—allows you to set the magnetic variation value. To configure the audible beeper: 1. From the instrument screen, select Menu > Setup > System > Beeper. 2. Select from the following options to determine when the GMI 10 makes audible sounds: Off, Alarms Only, On (Keys & Alarms). GMI 10 Quick Start Manual To specify how the GMI 10 utilizes coordinates: CauTIon: Do not change the position format or map datum unless you are using a map or chart that specifies a different position format or map datum. 1. From the instrument screen, select Menu > Setup > System > Position. 2. Choose from the following options: • Position Format—change the coordinate style in which a given location reading appears. • Map Datum—change the coordinate system on which the position format is based. To specify the speed sensor used when performing fuel economy calculations: 1. From the instrument screen, select Menu > Setup > System > Speed Sources. 2. Select Fuel Economy. 3. Select the appropriate sensor. To specify the speed sensor used when performing wind calculations: 1. From the instrument screen, select Menu > Setup > System > Speed Sources. 2. Select Wind. 3. Select the appropriate sensor. GMI 10 Quick Start Manual Setting Alarms 1. To set alarms on the GMI 10, from the instrument screen, select Menu > Setup > Alarms. 2. Select from the following alarm types. Select On and enter an appropriate value. • Shallow Water—set an alarm to sound when the depth is less than the specified value. • Deep Water—set an alarm to sound when the depth is greater than the specified value. • Surface Temperature—set an alarm to sound when the transducer reports a temperature that is 2°F (1.1°C) above or below the specified temperature. • Low Fuel—set an alarm to sound when the fuel remaining (based on fuel-flow information from a GFS 10) reaches the specified level. • Engine Status—set an alarm to sound when an engine indicates there is a problem. • Low Apparent Wind Speed—set an alarm to sound when the apparent wind speed is at or below the specified speed. • High Apparent Wind Speed—set an alarm to sound when the apparent wind speed is at or above the specified speed. • Low True Wind Speed—set an alarm to sound when the true wind speed is at or below the specified speed. 1 GMI 10 Quick Start Manual • High True Wind Speed—set an alarm to sound when the true wind speed is at or above the specified speed. • High Apparent Wind Angle—set an alarm to sound when the apparent wind angle is at or above the specified angle. • Low Apparent Wind Angle—set an alarm to sound when the apparent wind angle is at or above the specified angle. • Low True Wind Angle—set an alarm to sound when the true wind angle is at or below the specified angle. • High True Wind Angle—set an alarm to sound when the true wind angle is at or above the specified angle. • Battery Voltage—set an alarm to sound when the battery voltage reaches the specified level. Changing the Display DisplayDisplay Options 1. To change the display options on the GMI 10, from the instrument screen select Menu > Setup > Display. 2. Select a value for the listed options. TIP: You can also access the display options menu by pressing and quickly releasing the POWER button from any instrument screen. GMI 10 Quick Start Manual 1 Changing NMEA 2000 Device Options You can view information about your NMEA 2000 devices and change available device-specific options on the GMI 10. 1. From the instrument screen, select Menu > Setup > NMEA 2000 Devices. 2. You will see a list of all connected NMEA 2000 devices. Select a device to see information about the device, such as the software version and the serial number. 1 Advanced Sensor Configuration 1. From the instrument screen, select Menu > Setup > NMEA 2000 Devices. 2. Select the appropriate sensor. Select Config. 3. Enter the appropriate values for the listed options. TIP: For more information on configuring the sensor, refer to the installation instructions for the sensor. Honda Engine ECO Symbol The symbol appears when boats with NMEA 2000-compatible Honda engines are running in a fuel-efficient mode and engine RPM is displayed. GMI 10 Quick Start Manual Consult your Honda engine manual to determine if the engine is NMEA 2000 compatible. System Alarms and Messages noTE: There are several possible engine alarms. If the GMI 10 displays an...
Otros modelos de este manual:equipamiento barco - GMI 10 (685.57 kb)