Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
We believe this easy-to-use transceiver will provide you with dependable and reliable communications. This KENWOOD transceiver is a precision device. Treat it with care, and you will enjoy years of reliable operation. FEATURES • Compact design with a sturdy, polycarbonate body and a spring- loaded belt hook. • Can be used with the supplied Ni-MH battery pack or 3 AA batteries. • 15 channels with 121 tone/code settings for each channel, allowing you to ignore unwanted calls. • Privacy Talk scrambles all your voice messages, giving you complete privacy for your conversations. • Automatic battery power saver, providing you with longer battery usage. • Battery power level indicator with low battery power warning. • Key lock, preventing you from accidentally changing your transceiver settings. • Six different call tones allows you to identify yourself to your group before you begin speaking. • Hands free operation when using an optional KHS-21 headset. OPERATING CONDITIONS Open locations (no obstructions) Up to 4 miles (approximately 6.4 km) Residential areas (near buildings) Up to 1.5 miles (approximately 2.4 km) In steel/ concrete reinforced buildings Up to 200,000 square feet (approximately 18,580 m2) In high rises Up to 15 floors Note: The listed ranges are based on field testing and may vary with your operating conditions. FCC LICENSE INFORMATION Your KENWOOD radio operates on communications frequencies which are subject to FCC (Federal Communications Commission) Rules & Regulations. FCC Rules require that all operators using Personal Radio Service frequencies obtain a radio license before operating their equipment. Application for license must be made on FCC form 574. Temporary operation is allowed, using form 574T which has been provided for your convenience (remove the form from the center of this Instruction Manual). Please read and follow the instructions on the provided form. FAX: Forms can be obtained by fax from the FCC Fax-On-Demand system. Call 1-202-418-0177 from your fax machine and request document number 000574 for the form and instructions. If you would like an example of a completed 574 form, also request document number 005741. MAIL: Forms can be ordered by telephone, and will be sent to you by first class mail. Call the FCC Forms Hotline at 1-800-418-FORM (1-800-418-3676). INTERNET: Form 574 and instructions can be downloaded from the FCC Forms website at: Before filling out your Form 574 application Technical Data section, you must decide which frequency (or frequencies) you will operate on. Refer to the frequency charts on pages 41 and 42. Questions? Call the FCC for license application questions at 1-888-CALL-FCC (1-888-225-5322). PRECAUTIONS • Refer service to qualified technicians only. Do not modify or attempt to adjust the transceiver for any reason. • Do not expose the transceiver to long periods of direct sunlight, nor place it close to heating appliances. • Do not place the transceiver in excessively dusty, humid, or wet areas, nor on unstable surfaces. • Avoid extremes in exposure to weather, heat, and cold. This transceiver can be used in mild weather conditions, but it is not waterproof. • Turn OFF your transceiver while taking on fuel or while parked in gasoline service stations. • Do not operate your transceiver or charge your battery pack in an explosive atmosphere (gases, dust, fumes, etc.). • If an abnormal odor or smoke is detected coming from the transceiver, immediately switch OFF the power and remove the batteries from the transceiver. Contact your KENWOOD dealer. . Government law prohibits the operation of unlicensed radio transmitters within the territories under government control. . Illegal operation is punishable by fine and/or imprisonment. SAFETY: It is important that the operator is aware of and understands hazards common to the operation of any transceiver. CONTENTS UNPACKING AND CHECKING EQUIPMENT ......................... 1 SUPPLIED ACCESSORIES.......................................................... 1 ORIENTATION.......................................................................... 2 DISPLAY ................................................................................ 3 PREPARATION ........................................................................ 4 INSTALLING/ REMOVING THE BATTERY PACK................................ 4 INSTALLING/ REMOVING BATTERIES ............................................ 5 CHARGING THE BATTERY PACK ................................................. 6 INSTALLING/ REMOVING THE BELT HOOK .................................... 8 INSTALLING/ REMOVING OPTIONAL ACCESSORIES ........................ 8 GETTING STARTED ................................................................ 9 QUIET TALK/ DIGITAL QUIET TALK .................................... 11 SCANNING THE CHANNELS ............................................... 13 REVERT CHANNEL ...............................................................