Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
1 using supplied hardware. 4. Connect the electrical wiring for power, illumination, and ground as shown in FIG. 1. Connect supplied data line to remote, route to the radio and connect to the connector on the rear of the radio as shown in FIG. 2. 2 AMP FUSE BLUE Data line (connect to radio) BLACK: ground YELLOW Illumination (connect to instrument lighting) RED + 12V switched/ignition A NUT LOCK WASHER WASHER cm MOUNTING SURFACE GASKET REMOTE FIG. 1 Note, The rear view of radio and location of connection point will vary dependent on radio model. Data Line Connection Point: - FIG. 2...