Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
Minor corrections 17-Aug-07 WAJo All Added in LTO-3HH (820LTO) and using Tandberg LTO HH where all three products are covered. Trademarks LTO™ is a registered trademark of International Business Machines, Hewlett-Packard and Certance. Windows 2000/2003/XP, Windows 95, Windows 98, MS-DOS, Windows are registered trademarks of Microsoft Corporation in the United States. All other trademarks are registered marks of their respective owners. This publication may describe designs for which patents are granted or pending. By publishing this information, Tandberg Data ASA conveys no license under any patent or any other rights. Every effort has been made to avoid errors in text and diagrams. However, Tandberg Data ASA assumes no responsibility for any errors, which may appear in this publication. It is the policy of Tandberg Data ASA to improve products as new techniques and components become available. Tandberg Data ASA therefore reserves the right to change specifications at any time. We would appreciate any comments on this publication. Table of Contents 1. Introduction ....................................................................................................................... 1 1.1 IntroductiontoTandbergLTOHH(HalfHeight)SeriesofProducts...................1 1.2 Features and Benefits ............................................................................................ 1 1.3 How to Contact Tandberg Data Technical Support............................................... 2 2 Specifications ..................................................................................................................... 3 2.1 Tape Drive Capacity and Performance.................................................................. 3 2.2 Media Specifications and Compatibility ............................................................... 3 2.3 Mechanical Dimensions ........................................................................................ 3 2.4 Power Requirements.............................................................................................. 3 2.5 Heat Dissipation .................................................................................................... 4 2.6 Data Compression ................................................................................................. 4 3 Tape Drive Installation ..................................................................................................... 5 3.1 Solution Contents .................................................................................................. 5 3.2 Tape Backup Software Installation ....................................................................... 5 3.3 Installation of Software Device Drivers ................................................................ 6 3.4 Mechanical Installation Internal Tape Drive ......................................................... 6 3.5 Mounting Screw Requirements ............................................................................. 6 3.6 SCSI Bus Interface................................................................................................7 3.7 SCSI Controller Board Installation ....................................................................... 7 3.8 SCSI Configuration ............................................................................................... 8 3.8.1 SCSI-ID Selection Tandberg LTO HH Internal Tape Drive.................. 8 3.8.2 SCSI-ID Selection Tandberg LTO HH External Tape Drive................. 9 3.9 SCSI-bus Termination...........................................................................................9 3.9.1 Termination in General ......................................................................... 9 3.9.2 SCSI-bus Termination – Internal Tape Drives .................................... 10 3.9.3 SCSI-bus Termination – External Tape Drives ................................... 10 3.10 Installation Internal Tape Drive .......................................................................... 11 3.11 External Tape Drive Installation ......................................................................... 11 3.12 Verifying Tape Drive Operation ......................................................................... 12 4 Tape Drive Operation ..................................................................................................... 13 4.1 Front LED Indicators .......................................................................................... 13 4.2 Tape Cartridge Operation.................................................................................... 13 4.2.1 Write Protecting the Cartridge............................................................14 4.2.2 Loading a Data Cartridge Into a Tandberg LTO HH ......................... 14 4.2.3 Ejecting a Data Cartridge From a Tandberg LTO HH.......................15 4.3 Cleaning the Tape Drive..........................................................
Otros modelos de este manual:Receptores - LTO-2 HH (1.03 mb)
Receptores - LTO-3 HH (1.03 mb)