Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
Adjust VOLUME and TONE. Automatic playback relay (deck 1 to deck 2) E When deck 1 playback has finished, deck 2 playback starts automatically. 1 «gurnAj ;-i insert the playback tapes into A deck t ancJ d0ck 2 L»...... Playback side ^ <$>LAY Press PLAY of deck 1. □ 3 l,PAUSg <^*Y Press PAUSE of deck 2, then I | | | press PLAY. 6 Refer to □ 1 SELECTOR rr-rr-n nMl'llo EBiJS ¿-I- - * 2 [ Set SELECTOR to RADIO. Set BAND to the desired radio band. FM STEREO: To receive FM stereo broadcasts {If you have tuned into an FM stereo broadcast, the FM ST indicator will light.) AM: To receive AM broad- casts ►If FM stereo reception is poor, set BAND to FM. This will reduce the noise and provide clear reception; however, the broadcast will not be heard in stereo. 3 TUNING (aiiiiiniiil 4 Use TUNING to tune Into a desired broadcast. Adjust VOLUME and TONE. (® To turn off the radio: The radio can be turned off by setting SELECTOR to TAPE/ Adjust the antennas El FM: Pull out the telescopic antenna and adjust its length and angle for optimum reception. AM: Turn the unit in the direction which gives the best results. FM AM V. 7 You can use normal tapes only. The recording level is automatically adjusted. Recording from radio broadcasts £1 □ Press STOP/EJECT of deck 2 to Insert the tape. Recording side Tune Into the desired broadcast. (Follow the procedure 1-4 of “Listening to Radio Broadcasts”.) 3 Q Press RECORD When recording AM broadcasts: B.P selector can reduce unwanted beat signals (whistle) which sometimes occur. Set B.P to the position which gives best results. To stop the recording: Press STOP/EJECT. To briefly interrupt recording: Press PAUSE. To resume recording, press PAUSE again. Recording through the built-in microphone EO nirn wvO Im EBim 1_1_I Set SELECTOR to TAPE/SOS. Set EDITING to MIC. J IL Mcfi NOMWua mwi 3B8T0WEJECT nassnE insert the tape into deck 2, and I I I I press | HLCORD Pause button: Before beginning a recording, first press and iock PAUSE. Then press iBiamart. (The tape will not move.) When ready to record, press PAUSE to release it. This will start tape movement for immediate recording. Do not use PAUSE to stop the tape for a long period of time. Monitoring: The monitor system enables you to listen, through the speakers or headphones, to the sound as it is being recorded. When recording from the built-in microphone the sound being recorded cannot be monitored. Recording from deck 1 to deck 2 Q When PAUSE and immwhb of deck 2 are pressed, tape recording starts by pressing the deck 1 playback button. (Synch ro-start function) SELECTOR Set SELECTOR to TAPE/1133. HHrtai h«J Qm Insert the playback tape into cjeck ^ ancl the recor(jjng tape Into deck 2. Mic/I NflKUMjft MW* J] Set EDITING to the desired position. “NORMAL": Normal speed “HIGH”: High speed J IIPAUSE •mam Press PAUSE of deck 2, then □ □preMl RECORD