Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Pioneer Tamaño del archivo: 1.33 mb Nombre del archivo: Idioma del manual:

• Adjust the volume. No image is output when • Make sure the TV is connected correctly (see Connecting to your watching discs. TV on page 11). System does not output digital • As a copy-protection measure, some DVDs do not output 96kHz audio at 96kHz. audio. In this case, even if 96 kHz is selected, the player automatically outputs the audio at 48 kHz. This is not a malfunction. Can’t operate the remote control. • Replace the batteries (see Loading the batteries on page 6). • Operate within 23 feet (7 m), 30° of the remote sensor on the front panel (see Range of the remote control unit on page 6). • Remove the obstacle or operate from another position. • Avoid exposing the remote sensor on the front panel to direct light. En Additional information Additional information 15 Problem Remedy The microphone can’t be heard. • Stop the disc, then restart playback. • You are only using one microphone and it’s plugged into the MIC (SUB) jack. The MIC (SUB) jack can only be used if there is also a microphone plugged into the MIC (MAIN) jack. • Adjust the MIC VOL. Feedback noise when mic is • The mic is pointing toward the speakers. Keep the mic pointed switched on. away from the speakers. • The microphone level is set too high. Turn down the mic control level. SND. DEMO shows in the • Press and hold (stop) on the front panel for about five seconds. display and the unit can’t be The disc tray ejects automatically to indicate the Sound Demo controlled. mode is disabled. TRAYLOCK shows in the display • Press and hold (eject) on the front panel for about eight and the tray can’t be ejected. seconds. Then the tray can be opened/closed using (eject). DVD/CD/Video CD player The disc is ejected automatically • Clean the disc. after loading. • Align the disc properly in the disc guide. • If the region number on a DVD-video disc does not match the number on the player, the disc cannot be used (see DVD Video regions on page 49). • Allow time for any condensation inside the player to evaporate. Avoid using the player near an air-conditioning unit. Playback is not possible. • Disc may be loaded upside down. Reload the disc with the label side face up. Picture playback stops and the • Press , then start playback again (). operation buttons cannot be • Switch the power off once, then on again using the front panel used. STANDBY/ON button. Settings are canceled. • When the power is cut due to power failure or by unplugging the power cord for several days, settings will be canceled. No picture/No color. • Check that connections are correct and that plugs are inserted fully. • Check the instruction manual of the TV/monitor to make sure the TV/monitor settings are incorrect. Screen is stretched or aspect • The TV Screen setting is incorrect. Set the TV Screen option to does not change. match the TV/monitor you're using (see Video Output settings on page 44). When recorded on a VCR or • Due to the player’s copy protection circuits, connection of this passed through an AV selector, device through a VCR or an AV selector may prevent recording or there is disturbance in the cause picture problems. This is not a malfunction. playback picture. Problem Remedy English FrancaisDeutsch NederlandsItaliano Espanol En Additional information Additional information Problem Remedy Picture disturbance during • This player is compatible with Macro-Vision System copy guard. playback or dark. Some discs include a copy prevention signal, and when this type of disc is played back, stripes etc., may appear on some sections of the picture depending on the TV. This is not a malfunction. • Discs respond differently to particular player functions. This may result in the screen becoming black for a brief instant or shaking slightly when the function is executed. These problems are largely due to differences between discs and disc content and are not malfunctions of this player. Noticeable difference in DVD • DVDs and CDs use different recording methods. This is not a and CD volume. malfunction. WMA/MP3/JPEG discs Problem Remedy CD-ROM disc is not • Make sure that the CD-ROM was recorded using the ISO 9660 disc format. recognized by the See Disc / content format playback compatibility on page 49 for other disc system. compatibility information. Files don’t show up in • The files on the disc must be named with the correct file extension: .mp3 the Disc Navigator/ for MP3 files; .wma for WMA files; .jpg for JPEG files (upper or lower-case is Photo Browser. OK). See Disc / content format playback compatibility on page 49 for other disc compatibility information. Tuner Problem Remedy Considerable noise in • Connect the antenna (see Connecting the radio antennas on page 10). radio broadcasts. • Fully extend the FM wire antenna, position for best reception, and secure to a wall. • Connect an outdoor FM antenna (see Connecting external antennas on page 11). • Adjust the direction and position for best reception. • Connect an additional internal or external AM antenna (s...

Descargar ahora

Introduzca dos números de la imagen: