Iniciar sesión:
Votos - 3, Puntuación media: 3.3 ( )

Manual de usuario Magnavox, modelo VPA115BL

Fabricar: Magnavox
Tamaño del archivo: 432.9 kb
Nombre del archivo: 5f88e49d-ee37-9d24-c988-a8ff1b77911d.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


• Always unplug the car battery cord from the cigarette lighter jack before you unplug it from the VCP. • You must disconnect the car battery cord from the VCP before you can use standard AC electrical power. • If the vehicle’s engine is off, there will not be enough electrical voltage to operate the VCP. • Unplug the car battery cord from the cigarette lighter jack when you have finished using the VCP. 12 Remote Control Buttons EJECT Button Press to eject the tape. POWER Button Press to turn the VCP on or off. TRACKING (Up/Down) Buttons During tape playback, press to adjust the tracking manually. Details are on page 19. Press to remove vertical jitter in a Still picture. Details are on page 18. FF/SEARCH Button When tape playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. REW(ind)/SEARCH Button When tape playback is stopped, press to rewind the tape at high speed. During tape playback, press to rewind the tape while the picture stays on the screen. PLAY Button Press to play a tape. Also, press to release Search mode or Still mode and return to normal playback. Details are on page 18. STOP Button Press to stop tape playback or forward or reverse searching. Pressing the STOP button also returns tracking to auto tracking. Details are on page 19. STILL Button During tape playback, press to freeze the picture. Details are on page 18. POWER EJECT REW/SEARCH PLAY FF/SEARCH STOP STILL TRACKING Display Panel 13 VCP Display Panel Cassette Compartment Information about VCP Insert a tape here. operations is displayed here. POWERPOWER STOP EJECT POWER SYSTEM REPEAT REPEAT PICT. CONTROL PICT. CONTROL VIDEO CASSETTE PLAYER F.FWD PLAY REW POWER REPEAT PICT. CONTROL POWER Light This light indicates that the power is turned on. When moisture has accumu- lated in your VCP, this light will blink. Rewind Light This light appears when the tape is rewinding. PICT(ure) CONTROL Light This light indicates that the Picture Control function is operating. Details are on page 17. Play Light This light appears during tape playback. REPEAT Light Fast Forward Light This light indicates that the This light appears when the Repeat Playback function is tape is fast forwarding. operating. Details are on page 17. 14 Front Panel POWER Button Press to turn the power on and off. PLAY Button Press to play a tape. Also, press to release Search mode or Still mode and return to normal playback. Details are on page 18. REW(ind) Button When tape playback is stopped, press to rewind the tape at high speed. During tape playback, press to rewind the tape while the picture stays on the screen. Details are on page 18. STOP/EJECT Button Press once to stop the tape. When tape playback is stopped, press to eject the tape. F.FWD (Fast Forward) Button When tape playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 18. PICT(ure) CONTROL Button Press to improve the playback picture quality of rental tapes. Details are on page 17. POWERPOWER STOP EJECT POWER SYSTEM REPEAT REPEAT PICT. CONTROL PICT. CONTROL VIDEO CASSETTE PLAYER F.FWD PLAY REW REPEAT Button Press to make the VCP play a tape over and over. Press again to cancel Repeat Playback. Details are on page 17. Remote Sensor Receives the signal from your remote control so you can operate your VCP from a distance. Rear Panel 15 AC Power Cord ANT(enna) OUT Jack Connect to a standard AC outlet CH3/CH4 Switch Use the supplied RF coaxial cable to supply power to the VCP. Make sure the car battery cord is disconnected from the VCP. Set to channel 3 or 4 to use your TV with your VCP. Details are on pages to connect this jack to the ANTENNA IN jack on your TV or Cable Box. ANT OUT ANT IN CH3 CH4 VIDEO 13.2V ANT(enna) IN Jack Connect your antenna or cable here. Details are on pages six-10. six-nine. Details are on pages six-nine. VIDEO OUTPUT Jack Use a video cable (not supplied) to connect this jack to the Video In jack of a TV, camcorder, VCR, or moni- tor. Details are on page 10. AUDIO OUTPUT Jack Use an audio cable (not supplied) to connect this jack to the Audio In jack of a TV, camcorder, VCR, or audio system. Details are on page 10. 13.2V Jack Connect the car battery cord here when you use the VCP in your vehicle. Details are on page 11. 16 Playing Before playing a tape, make sure the VCP and TV are connected (see pages six-11). Then, follow the steps below. 1 Turn on the TV. Set it to the same channel as the CH3/CH4 switch on the back of the VCP. 2 Insert a tape in the VCP. The power will come on and playback will start automatically. The POWER light and the Play light will appear on the display panel of the VCP. 3 If the tape you want to play is already in the VCP, make sure the VCP power is on, then press the PLAY button. 4 To stop playback, press the STOP button. 5 Press the REW(i...

Otros modelos de este manual:
Receptores - VPA115PR (432.9 kb)
VCR / vídeo - VPA115PR99 (432.86 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría