Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
• During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit. IMPORTANT INFORMATION You cannot connect the unit directly to the following CD automatic changers. For users who want to use older changers with the unit, follow the directions below according to the type of changer you own: • KDC-C200 / KDC-C300 / KDC-Use the extension cable and the control attached to the CD changer, and the CA-DS100 converter cable. • KDC-C301 / KDC-C600 / KDC-C800 / KDCC601 / KDC-C401 Use the extension cable attached to the CD changer, and the optional CA-DS100 converter cable. • KDC-C100 / KDC-C302 / C205 / C705 / non-Kenwood CD changers Cannot be used with this model. 2 CAUTION You can damage both your unit and the CD changer if you connect them incorrectly. — 3— Safety precautions English NOTE • If you experience problems installation, consult your • If the unit does not seem try pressing the reset button not solve the problem, consult dealer. AUD1 2 3 4 5 6 CLK ATT SRC PWR OFF SCAN RDM REP TC/D.SCN M.RDMLOUD DISC HIGH POWER 40Wx40Wx4 MENU FM AM FFREW PR OG VOL ADJ NAME SETTI PTY Reset button • Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Cleaning the Faceplate Terminals If the terminals on dirty, wipe them with Cleaning the Unit If the front panel gets dirty, turn power and wipe the panel with a cloth or soft cloth. 2 CAUTION Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off. Cleaning the Tape Head After you have used times over a long period, from the tapes and dust tape head, causing noise in sound quality. Clean the tape cleaning tape or cleaning kit designed in car audio systems. Handling Cassette Tapes • Do not play a cassette whose tape has gone slack. In such a case, wind it tight using a pencil or the like in one of the spools. Playing slack cassette tapes can result in the tape tangling around the capstan and/or pinch rollers, causing trouble. • Do not play a deformed cassette or one whose label is starting to come off, as it can cause the unit to malfunction. • Do not leave tapes in hot places, such as above the fascia panel (dashboard) and other spots exposed to direct sunlight, or near heater outlets. They can deform the cassette. • Avoid using extremely long cassette tapes, such as 100-minute-long tapes. Such tapes are very thin, and can tangle easily around the pinch rollers or other parts inside the unit, causing unit failure. • Remove a cassette tape from the unit when not listening to it for a whilst. If you leave a tape in the unit too long, it may stick to the tape head and cause unit malfunction. — 4— General features Release button Power SRC / PWR OFF 1 2 3 4 5 6ATT AUD CLK AM FM FFREW SRC PR OG PWR OFF SCAN RDM REP TC/D.SCN M.RDMLOUD DISC PTY HIGH POWER 40Wx40Wx 4 MENU #1 ~ 5d VOL ADJ NAME SETTI AMAUD4 . FMu Turning on the power: Press the SRC button. NOTE Turn the power on before carrying Turning off the power: Hold down the PWR OFF button for Volume Increasing Volume: Press the u button to turn up the volume. ATT / LOUD Decreasing Volume: Press the d button to turn down the volume. ATT indicator Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original LOUD indicator level. NOTE Turning the volume up, or turning it all the way down deactivates the attenuator function. — 5— English General features Switching Modes Loudness Switching Modes: Each time you press the follows: t Tuner mode t Tape mode t External disc control mode 1 (KRC-278RA/278RG/23RA/23RG only) t External disc control mode 2/AUX mode (KRC-278RA/278RG/23RA/23RG only) t Standby mode Selecting the standby mode: Press the SRC button repeatedly to select to "ALL OFF" . When "ALL OFF" is displayed, the standby mode is turned on. The standby mode turns all functions off although leaving the unit’s power on. Use this mode when you want to have the display illuminated but do not want to listen to anything. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is...
Otros modelos de este manual:Receptores - KRC-178RA (469.18 kb)
Receptores - KRC-278RA (469.18 kb)
Receptores - KRC-278RG (469.18 kb)