Votos - 5, Puntuación media: 4.6
(
)
)
|
Fotos y especificaciones Hyundai H-CMD4001 |
Resumen del manual
When the selected language is recorded on the disc then this language will automatically be shown. If not, the first language recorded on the disc is displayed. [3] Audio setting: With this option you can select the preferred language for the audio output. When the selected language is recorded on the disc (not all discs have multiple languages recorded) then this language will automatically be played. If not, the first language recorded on the disc is played. 32 [4] Disc menu setting: With this option you can select the preferred language for the disc menu. When the selected language is recorded on the disc then this language will automatically be selected. If not, the first language recorded on the disc is displayed. [5] Version display: With this option you can know the version about the unit. 2. Display setup: :£i: Display [•J TV display @ TV Typo • Angle mark 1^1 Screensaver [1] TV Display setup: Set TFT screen mode to the correct ratio: Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letterbox) and Wide (16:9). Different disc formats will display different images depending this setting and the screen size used. [2] TV Type setup: Select this menu item to set up your preferred video output format. PAL is commonly used in Europe0 NTSC is commonly used in the USA and Japan. Auto is commonly used automatically. [3] Angle mark setup: When playing a DVD disc and you have selected ON, then the screen will show the angle mark. This will give you the possibility to view multi angle DVD’s. [4] Screen Saver setup: When playing a DVD disc and you have selected ON, the screen will enter Screen Saver function if you stop played about 3 minutes. 33 3. Audio setup: [1] Down Mix setup: Press the DOWN arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to “STEREO”. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect), select ”LT/RT” [2] Dual Mono setup: Select the type of output of the Left and Right audio output connectors. Stereo is normal Stereo, L-Mono is all sound on the Left Audio output, R-Mono is all sound on the Right channel. The “Mix-Mono” function only works when a DVD is being played in DTS 5.1 mode. [3] Dynamic setup: This function is to adjust the linear compression rate to obtain the different compression results of the signals. Standard set to “OFF” 4. Parental setup: ■¿Î Parental |^| Change • Parent • Default 34 [1] Change setup: With this option you can change your password protection. The default password is 0000 [2] Parent setup: For DVD discs, which support this system, parents can prohibit watching content that might be inadvisable for children. [3] Default setup: With this option you can clear all your setup and resume default setup. Code Description kid safe General Audiences - All ages admitted PARENTAL GUIDANCE SUGGESTED - Some material may not be suitable for children PARENTS STRONGLY CAUTIONED - Some material may be inappropriate for children under 13 Restricted, under 17 requires accompanying parent or adult guardian. RESTRICTED - Under 17 requires accompanying parent or adult guardian NO ONE 17 AND UNDER ADMITTED Above 17 Admitted 1 2. G 3. PG 0 1 P 6. R 7. NC-17 00 "3 ■a < 35 TV 1. Connect TV BOX, and then press MODE button to select TV mode. 2. In TV mode, press the MENU button once to enter TV menu setting. 3. Press theA/T buttons to select one of the setup pages: Auto program => Manual program. 4. Press the OK button to enter the page. 5. Press the A/T buttons to select the setting. 6. Press OK again to confirm, press MENU to return to settings list. Note: This function is available when TV tuner is connected. TV MENU Auto program (Auto seek mode) • System Select this menu item to set TV video system: PAL=>SECAM1=> SECAM2, press OK button to select. • Audio Select this menu item to set the TV sound system: AUDIO1=> AUDIO2=> AUDIO3, press OK button to select. • Search Select this menu item is to start searching and storing stations automatically. Manual program (manual seek mode) • Storage Select this menu item to set the storage number. • System Select this menu item to set TV video system: PAL=>SECAM1=> SECAM1, press OK button to select. • Audio 36 Select this menu item to set the TV sound system: AUDIO1=> AUDIO2=> AUDIO3, press OK button to select. 37 • Channel Select this menu item is to set your desired searching channel, press buttons to select one. • Fine Select this menu item is to fine TV picture and sound until it achieves the best quality, press buttons to adjust • Memory Select memory on or off is to set whether memory the searched station or not, press OK button to select. Other functions_ Back view camera This unit is equipped with back view camera output. The camera is used to observe the situation behind the vehicle when you are backing the car. Please connect y...