Votos - 5, Puntuación media: 2.8
(
)
)
|
Fotos y especificaciones Hyundai H-1407 |
Resumen del manual
Always press "STOP" button to stop the disc spinning first. • Place a CD into the compartment with the label-side (printed side of disc) facing upwards. Press down in the center part of disc until the disc "locks" onto the center spindle. • When the CD has been placed onto the center spindle, gently lower the CD-door downwards until it locks shut. • The CD is now ready to be played. • To remove a disc, follow the same procedure as described above, except to remove the CD instead of inserting it into the compartment, by placing one finger at the middle of disc (center spindle) & the other at the edge of the disc & gently pulling upwards. • Important : always hold a CD by its edges. Avoid getting any finger prints, smudges or dirt onto the surface of a disc. In case this happens, use a special CD-cleaning cloth or cleaning kit to remove the dirt or smudges. 4 Important: Please make sure to always fold down the handle before opening the CD door. Compact disc operation_ • Set FUNCTION switch to CD (MP3) position. • Put a CD into the CD compartment and close the CD door. • The LCD display will show the total number of track after a few second. Play/pause mode • Press the PLAY/PAUSE button to start play, the LCD display will show the first track. • Press the PLAY/PAUSE button to pause at any track when playing, track number on the LCD display flashed. • To stop the CD, press the STOP button. Skip and search mode • Press the NEXT button once to skip to the next track. Keep pressing to search for a particular at high speed forward. Release the button to resume normal play. • Press the BACK button once to skip back to previous track. Keep pressing to search for a particular point at high speed backward. Release the button resume normal play. Repeat mode • Press the REPEAT button once for single track repeat playing. • Press twice for all track repeat playing. • To cancel repeat play, press REPEAT button. 5 Program mode • Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, be sure to press the STOP button. • Press the PROG button, the display will show "pOl" and the "program" symbol I ^ I will be shown, to indicate that the set is now in "memory programming mode", at the first memory position. • Select a desired track by using the BACK AND NEXT buttons. • Press the PROG button to confirm. • Repeat steps described above to enter additional memories into the program if necessary. • When all the desired tracks have been programmed, press PLAY button to play the disc in the order you have programmed. • To stop the CD, press the STOP button. NOTE: • The program memory will be cleared only when the CD compartment is opened or turn off the CD or power supply. • To remove the CD from the unit open the CD door. • To turn off the CD player set FUNCTION switch to TAPE position. MP3 operation • Set FUNCTION switch to CD (MP3) position. • Open the CD door. Put a MP3 disk into the CD compartment and close the CD door. • The disk will spin and perform a full check of the disc to count the total number of songs. Then playback of the first song (track) will begin and the display will indicate the current track no: (001). • At any time during playback, press and release BACK AND NEXT buttons to skip backwards or forwards by one track. • MP3 discs often have “folder” (sub-directories) which contain groups of songs. • If your MP3-CD has no folders, you can use the "skip +10/folder" button to jump 10 songs ahead. • If your MP3-CD has folders, you can select the folder to playback by pr...
Otros modelos de este manual:Receptores - H-1407 Silver (751.97 kb)