Iniciar sesión:
Votos - 3, Puntuación media: 3.3 ( )

Manual de usuario Sony, modelo 453V

Fabricar: Sony
Tamaño del archivo: 129.11 kb
Nombre del archivo: 2bb28fb4-668a-4f95-b244-bc297f0a6e7f.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


2 Connect the AC power adaptor (supplied to TCM- 454VK) to the DC IN 3V jack of the battery charger adaptor and to the wall outlet. The power indicator lights up. 3 Unplug the AC power adaptor from the wall outlet and from the battery charger adaptor after about eight hours. Notes •The power indicator lights in green as long as the AC power adaptor is plugged to the wall outlet and the DC IN 3V jack, even when the charging has not been done. •Use only the supplied or recommended AC power adaptor, battery charger adaptor and rechargeable batteries. •The rechargeable batteries can be charged approximately 500 times. •Do not leave the battery charger adaptor plugged in for more than 20 hours. Overcharging may damage the rechargeable batteries. When to replace the batteries Replace the batteries with new ones or charge the batteries (TCM- 454VK only) when the BATT lamp dims. Notes •After the batteries have been used for a while, the BATT lamp may flicker with the playback sound when you turn up the volume; however, this does not mean that you need to replace the batteries. •The unit will play back normally for a while even after the BATT lamp dims. However, replace the batteries as soon as you can. If you do not, subsequent recording will not be done correctly. Battery life (Approximate hours) (EIAJ*) Playback Recording Sony alkaline LR6 (SG) 11 11 Sony R6P (SR) 3 3 (Models for U.S.A. and Canada) 3 3 (Model for Europe) 3.5 4 * Measured value by the standard of EIAJ (Electronic Industries Association of Japan). (Using a Sony HF series cassette tape) Note The battery life may shorten depending on the operation of the unit. House Current Connect the AC power adaptor to DC IN 3V and to the wall outlet. The AC power adaptor is supplied only with the TCM-454VK. For other models, use the AC-E30HG AC power adaptor (not supplied). Do not use any other AC power adaptor. Polarity of the plug Note Specifications for AC-E30HG varies for each area. Check your local voltage and the shape of plug before purchasing. z Operating the Unit Recording You can record right away with the built-in microphone. Make sure that nothing is connected to the MIC jack. 1 Insert a normal (TYPE I) tape with the side to start recording facing the cassette holder. 2 Set VOR to: H or L to start and pause recording automatically to the sound. H (high) to record at meetings or in a quiet and/ or spacious place. L (low) to record for dictation or in a noisy place. OFF to start and stop recording manually. Note When the sound to be recorded is not loud enough, set the VOR switch to OFF, or the unit may not start recording. 3 Press r REC. Recording starts. At the end of the tape, recording stops and the unit turns off automatically. Sony Corporation a 1998 Printed in Taiwan, R.O.C. Cassette-Corder Operating Instructions TCM-473V/455V/454VK/453V WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Welcome! Thank you for purchasing the Sony Cassette-Corder. Some features are: •VOR (Voice Operated Recording) system that starts and stops recording automatically in response to the sound, to save tapes and batteries. •SPEED CONTROL function that lets you increase or decrease the tape playback speed. •Stereo playback function that lets you enjoy prerecorded stereo tapes with the supplied headphones (TCM-473V only). About This Manual The instructions in this manual are for 4 models. The TCM-453V is the model used for illustration purposes. Their differences are shown in the table below: TCM-473V 454VK 455V/453V EAR (earphone) jack — g g 2 (Stereo headphones) jack g — — Battery charger adaptor — g — Rechargeable batteries — g — AC power adaptor — g — g: provided or supplied —: not provided or not supplied z Getting Started Preparing a Power Source Choose one of the following power sources. Dry Batteries Make sure that nothing is connected to the DC IN 3V jack. 1 Open the battery compartment lid. 2 Insert two size R6 (AA) batteries (TCM-455V for U.S.A.: supplied/Other models: not supplied) with correct polarity and close the lid. Notes •Do not charge a dry battery. •Do not use a new battery with an old one. •Do not use different types of batteries. •When you do not use the unit for a long time, remove the batteries to avoid any damage caused by battery leakage and subsequent corrosion. •Dry batteries will not be expended when another power source is connected. To take out the batteries 3-862-202-12(1) To Press or slide Stop recording p STOP Pause recording PAUSE c in the direction of the arrow To release pause recording, release PAUSE c*. Review the portion Press and hold 0 REW/REVIEW just recorded during recording. Release the button at the point to start playback. * PAUSE c will be also automatically released when p STOP is pressed (stop-pause-release function). To monitor the sound For TCM-473V: Connect stereo headphones (supplied) firmly to the 2 (headphones) jack. For...

Otros modelos de este manual:
Receptores - 454VK (129.11 kb)
Receptores - 455V (129.11 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría