Votos - 2, Puntuación media: 4.5
(
)
)
|
Fotos y especificaciones Kicker IK500 |
Resumen del manual
Choose the dock adapter that best fits your iPod or use the universal adapter that came with your iPod. See the table below. 2. Attach the adapter to the iK500’s docking bay. 3. Connect your iPod to the iK500’s dock connector. 4. Plug the power cable into the DC input on the back of the iK500. 5. Plug the 2-prong electrical plug into a surge protected electrical outlet. The Kicker iKICK iK500 Stereo System for iPod is designed for “Livin’ Loud” with your iPod in the home environment. The iK500 is fully featured with dual full-range 5” (`127mm) Kicker drivers and 3/4” (20mm) silk dome tweeters driven by a powerful stereo amplifier with digital signal processing. The 6” (152mm) square passive radiator (subwoofer) on the back of the iK500 balances the sonic output, adding the punchy low-frequency response that put Kicker subwoofers on the map. The rotary control and infrared remote allow simple, streamlined control of your iK500 Stereo System. The iK500 can be used with any existing iPod. In addition, the iK500 boasts a wide range of connectivity options including stereo RCA outputs, and an 1/8” stereo auxiliary input for incorporating additional audio devices with your iK500 Stereo System. INSTALLATION Congratulations on your KICKER purchase Please record your purchase information and keep your sales receipt for validation of warranty. Authorized Kicker Dealer: Purchase Date: Model Number: _________________________ _________________________ _________________________ 2 INSTALLATION DigitalStereoSystem foriPodTM Owner’sManual Model: iK500STEREOSYSTEM 3 iK500 iK500 Figure 2 Rotary Control LCD Display 5” (127mm) Full-Range Drivers 3/4” (20mm) Silk Dome Tweeters IR Remote Receiver Docking Bay Transport Handle Square Passive Radiator 1/8” Stereo Stereo RCA Auxiliary Input Output L R DC Power 22 Volts Figure 3 ImportantSafetyInstructions Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent damage to your self, your Kicker product, or your portable entertainment device. The iK500 should not be used near water or in an environment where exposure to liquids is possible. This includes but is not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid containers should not be placed on or near the iK500 Stereo System. The iK500 Stereo System should not be cleaned with liquid cleaners. Use only a dry cloth to clean the iK500. Only use the iK500 in areas with adequate open ventilation allowing at least 4” of space on all sides of the iK500. Do not set the iK500 on any surface or cover the iK500 with any object that could impede the airflow to and from the iK500 Stereo System. The iK500 should not be placed near any source of heat. This includes but is not limited to stoves, radiators, heating elements, electronic heat sources, and areas where excessive solar heat can be generated. Do not install the iK500 near any flame or place any flammable objects near the device. The power outlet used to provide power to the iK500 should be accessible at all times. The polarized 2-prong electrical plug has a wide blade and narrow blade that should fit into the corresponding wide and narrow receiving connections of your electrical outlet. Do not force the plug into the outlet. If the plug provided with the unit does not fit, consult with an electrician to upgrade the electrical outlet accordingly. The power cord should be situated in a way that protects it from being pinched, walked on, tripped over, or accidentally pulled from the electrical outlet or the electrical input on the iK500. Do not run the cable through doorways or underneath objects that could damage the wire or tear the insulating material surrounding the wire. Only use the manufacturer supplied power supply with the iK500. We recommend using a surge protector/power conditioner and unplugging the iK500 during any electrical storms or situations that could cause voltage fluctuations in the electrical system. Figure 1 The iPod should be mounted on the docking bay before connecting any power cables to the Kicker Stereo System. iPod Model 1. PHOTO (20GB, 30GB) iPod photo, color U2 iPod 20GB, 30GB 2. 4G (20GB) 4th Generation iPod, U2 iPod 20GB 3. 4G (40GB) 4th Generation iPod 40GB 4. 3G (10GB, 15GB, 20GB) 3rd Generation iPod 10GB, 15GB, 20GB 5. 3G (30GB, 40GB) 3rd Generation iPod 30GB, 40GB 6. PHOTO (40GB, 60GB) iPod photo 40GB, 60GB 7. MINI (4GB, 6GB) iPod mini 4GB, 6GB 8. NANO 1st and 2nd Generation iPod nano 2GB, 4GB, 8GB iK500 Dock Adapter Skid Resistant/Non-Marking Feet Serial Number: _________________________ Vibration Isolation Pad Note: To prevent vibration during playback, use the enclosed vibration isotation pad as shown in Fig. 2. The iK500 docking station has been optimized to match the sonic output of the iPod with the iPod’s EQ in the “Off” setting. The iPod’s “Sound Check” should also be off; otherwise you may experience poor bass response and lower volu...