Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
14-1252 OWNER’S MANUAL Please read before using this equipment. SCR-100 Stereo Cassette Player/Recorder 14-1252.fm Page 2 Thursday, October 28, 1999 3:27 PM FEATURES Your Optimus SCR-100 Stereo Cassette Player/Recorder is a lightweight, portable cassette player that delivers great sound quality through its built-in speaker. The recorder puts many features in a small package, making it easy to carry wherever you go. Its features include: Built-in Wide Range Speaker — lets you listen to mono sound without carrying headphones. Built-in Stereo Microphone — lets you record in stereo without connecting stereo microphones. Extended Bass Boost — provides richer, fuller bass than ordinary players. Numeric Tape Counter — helps you quickly locate a specific section on the tape. Cue/Review — lets you listen as you fast forward or rewind the tape to locate specific sections. © 1999 Tandy Corporation. All Rights Reserved. Optimus, RadioShack, and Adaptaplug are registered trademarks used by Tandy Corporation. 2 14-1252.fm Page 3 Thursday, October 28, 1999 3:27 PM Battery/Record Indicator — shows you when the SCR-100 is recording and indicates battery condition. Automatic Stop — shuts off the SCR-100 when it reaches the end of a tape. DC Input Jack — lets you power the player from an external DC source using an adapter (not supplied). Headphone Output Jack — lets you listen in private or use optional external speakers. Three Power Options — you can power the SCR100 from AA batteries, standard AC power, or DC power. Note: You need a pair of headphones or amplified speakers (not supplied) with a 1/8-inch (3.5-mm) plug to listen to tapes in stereo. Your local RadioShack store carries a wide selection of these products. 3 14-1252.fm Page 4 Thursday, October 28, 1999 3:27 PM CONTENTS Preparation ........................................................... 5 Installing Batteries .......................................... 5 Using AC Power .............................................. 6 Using Vehicle Battery Power .......................... 8 Connecting Headphones/Speakers .............. 10 Listening Safely ..................................... 11 Traffic Safety .......................................... 12 Operation ............................................................ 13 Loading a Cassette Tape .............................. 13 Recording ..................................................... 14 Using the Built-in Stereo Microphone .... 14 Using External Stereo Microphones ...... 15 Playing a Tape .............................................. 16 Using the Tape Counter ......................... 18 Tape Tips ...................................................... 19 Tape Quality .......................................... 19 Restoring Tape Tension and Sound Quality 19 Cleaning the Tape-Handling Parts ......... 20 Care ..................................................................... 22 Specifications .................................................... 23 4 14-1252.fm Page 5 Thursday, October 28, 1999 3:27 PM PREPARATION INSTALLING BATTERIES Your SCR-100 requires two AA batteries (not supplied) for power. For the best performance and longest life, we recommend RadioShack alkaline batteries. Cautions: • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. Follow these steps to install batteries. 1. Slide the battery compartment cover in the direction of the arrow to open it. 5 14-1252.fm Page 6 Thursday, October 28, 1999 3:27 PM 2. Place the batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside 3. Replace the cover. When RECORD/BATT does not light steadily during play, replace the batteries. Warning: Dispose of old batteries promptly and properly. Do not bury or burn them. Caution: If you do not plan to use the SCR-100 with batteries for two weeks or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. USING AC POWER You can power the SCR-100 using a 3V, 300-mA AC adapter and a size H Adaptaplug® (neither supplied). Both are available at your local RadioShack store. 6 7 Cautions: You must use a Class 2 power source that supplies 3V AC and delivers at least 300 mA. Its center tip must be set to positive and its plug must fit the SCR-100's DC 3V jack. Using an adapter that does not meet these specifications could damage the SCR-100 or the adapter. • Always connect the AC adapter to the SCR-100 before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the SCR-100. Follow these steps to power the SCR-100 from standard AC power. 1. Set the adapter’s voltage switch to 3V. ! 14-1252.fm Page 7 Thursday, October 28, 1999 3:27 PM 14-1252.fm Page 8 Thursday, October 28, 1999 3:27 PM 2. Insert the Adaptaplug into the cord so it reads ...