Iniciar sesión:
Votos - 3, Puntuación media: 4 ( )

Manual de usuario Vitek, modelo VT-3478 BK

Fabricar: Vitek
Tamaño del archivo: 1.73 mb
Nombre del archivo: Vitek-VT-3478_OG-VT-3478_BK-Pdf-Rus.Pdf
Idioma del manual:ruukende
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. LASER SAFETY: This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE, PROCEDURE HEREIN MAY RESULT IN HAZARDOUS RADIAT ION EXPOSURE. DANGEROUS VOLTAGE The lightning flash with arrowhead symbol, within an equilateral tri angle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficie nt magnitude to constitute a risk of electri c shock to persons. ATTENTION The exclamation point within an equilateral Triangle is intended to alert the used to the Presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Danger: Invisible and hazardous laser radiation when Open and interlock failed or defeated. Avoid direct exposure to beam. Dripping warning: Ventilation warning use. The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product. The normal ventilation of the product shall not be impeded for intended Notice: • Please read through this manual before using the unit • The unit can only be used with the power source the manual and the unit itself specified • Make sure to hold the isolated terminal of the plug to operate when connecting or pulling out the power cord. • Turn off the power if you don’t use the unit, Make sure to pull out the power plug if the unit is not used for a long time or when thundering or lightening. • Do not place the unit in high-temperature,vi-brating,stuffy,environment or directly expose to sunlight. Do not put this unit together with high-power electric appliance to ensure good ventilation. • Make sure the unit is far away from fire,hea-ting source and magnetic source.Do not use alcohol, gasoline or any other chemical solvent to clean the unit. • Don’t spray any liquid or insert any object into the unit. Don’t disassembly the unit. • Don’t use the unit in watery place or put heavy objects on it. • Take out the disk before moving the unit. • Make sure to turn off the power and pull out the plug when there is smoke or unusual smell and make it serviced by professional person. DESCRIPTION ABOVE-VIEW 1. Volume controls 2. FM antenna 3. Handle 4. CD disc slot 5. Latch of the CD disc slot 6. PLAY MODE button 7. TUNING 8. PROG button 9. BBS button 10. FOLDER UP button 11. CD/USB button 12. PAUSE/STOP-EJECT/F.FWD/REW/PLAY/RE-CORD buttons 13. USB connector FRONT PANEL 14. Loudspeaker 15. CD SKIP Back button 16. CD SKIP Next button 17. LCD of CD-player 18. STOP button 19. PLAY/PAUSE button 20. Cassette receiver slot/ Cassette receiver REAR PANEL 21. Switch BAND (AM/FM/FM ST.) 22. FUNCTION (RADIO/CD/TAPE (OFF) 23. Slot for batteries 3478.indd 4 17.04.2007 14:47:56 ENGLISH 24. Head-phones jack 25. Plug REMOTE CONTROL OPERATING MANUAL ON/OFF 1. Insert the net cable in the jack (25), then put the plug in the socket. Change the position of FUNCTION (22) to the required sound position (RADIO, cD, TAPE). 2. To switch off change the position of FUNCTION (22) to TAPE (OFF). 26. CD Button 27. USB Button 28. PLAY MOD Button 29. PROG Button 30. ■ STOP Button 31. Ml PLAY/PAUSE Button 32. 9 SKIP BACK Button 33. : SKIP NEXT Button 34. ▼ ALBUM DOWN Button 35. 5 ALBUM UP Button 36. TRACK -10 Button 37. TRACK +10 Button First time to Use the Remote Control The battery is pre-installed in the remote control with the insulation plate. Before starting to operate the remote control, please pull out the insulation plate from the battery compartment. Remote Control Battery Installation Note: Do not attempt to recharge, short-circuit, disassembly, heat or throw the batteries into the fire. If the remote control doesn’t work or the signal gets weaker, the battery might get weaker. In that case, please replace the battery. 1. Pull out the battery holder as shown right. 2. Place one battery (CR 2025) as shown right. Make sure that the polarity (+/-) of battery matches the marks inside the unit. 3. Insert the battery holder into its compartment as shown right. GENERAL OPERATIONS Adjusting the volume After you have found the required station, adjust the volume using VOLUME (1). Low frequencies adjusting Press BBS button (9), to get good sound of low frequencies. RADIO 1. Set FUNCTION (22) at RADIO position. 2. Choose by means of BAND switch (21) AM or FM or FM.ST range. 3. Use TUNING (7) to adjust to the required station. 4. After you have finished listening to the radio set FUNCTION (22) at the position TAPE (OFF) . CD PLAY-BACK 1. Set FUNCTION (22) at CD position 2. If there is no CD in the CD-slot or a CD is damaged the indicator “no” will appear on the LCD. Loading of discs 1. Use latch of the CD disc slot to o...

Otros modelos de este manual:
Receptores - VT-3478 OG (1.73 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría