Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Follow all warnings and operating recommendations in this manual. Keep this manual for future reference. /¿\ ATTENTION! /I\ / ■ \ Risk of electric shock! DO NOT OPEN! Warning: To prevent fire or shock hazard do not expose the appliance to rain or moisture. To prevent shock hazard do not remove the cover yourself. Apply to a service centre for repair and maintenance. A This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to human beings. /i / \ \ The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the appliance. CLASS 1 LASER PRODUCT This appliance is classified as Class 1 Laser Product. The corresponding mark is on the rear panel of the appliance and it means that the appliance employs a beam system. Do not attempt to disassemble the appliance. REFER TO QUALIFIED SERVICE PERSONNEL FOR REPAIR. PRECAUTIONS Connecting to power sources Check, whether the electricity supply in your home sockets corresponds to the voltage specified on the housing of the unit. To prevent fire or shock hazard do not use this unit near water for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool and such like places. Prevent the unit from dripping and splashing. Do not immerse the unit into water. Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Place the unit in a way that you could easily pull out the plug from the socket if there are some damages. Place the unit on the flat surface. For additional protection during lighting and in cases when you are not going to use the unit for a long time, unplug the unit. It will prevent the unit from failure during lighting and power surges. To unplug the unit, hold it by the plug. Do not pull by the cord. In order to avoid electric shock do not remove the cover yourself. Do not repair and do not modify 3 3950IM.indd 3 19.05.2008 14:58:32 ENGLISH ENGLISH the unit. Technical maintenance must be performed only by qualified service personnel. Install the unit in places with proper ventilation. The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Do not expose the unit to direct sunlight, excessive dust or mechanical shocks. Be especially careful if children or infirm persons are near the operating appliance. Do not leave them unattended. Provide that no foreign objects get into openings of the unit; it can lead to fire or electric shock. If it happens unplug the unit and apply to the service centre. Conditions Requiring Service Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power supply cord or plug is damaged. b) There are foreign objects inside the unit. c) If the unit has been exposed to rain or water. d) If the unit does not operate normally by following the operating instructions. e) If the unit has been dropped or its cabinet has been damaged. f) When the unit exhibits a distinct change in performance - this indicates a need for service. Cleaning Unplug this unit from the wall outlet before cleaning. Use a damp cloth for cleaning. Wipe the front panel with a damp soft cloth dampened in soapy water. Do not use liquid cleaners or aerosol cleaners. Cleaning discs Do not use cracked or deformed discs, it can damage a unit. Hold the disc by the edges. Do not touch the surface. Dust, scratches or fingerprints on the surface may lead to a failure of the unit. Protect the disc from direct sunlight; keep them away from heat sources, high temperature and moisture. After usage, put the discs in the case for storage. Wipe periodically the surface of the discs with a soft cloth from the center to the edges. Do not use detergents. DESCRIPTION 1. The PHONES jack for connecting the earphones 2. The PROGRAM button for programming and viewing the programmed tracks 3. The REP/RAN (repeat/random playback) button 4. The STOP/SD button (stop playback of CD, MP3, USB, SD/MMC, cancel programming of CD, press and hold this button for more than 1,5 seconds to change a media device USB 1.1/SD (MMC)) 5. Disc slot 6. The OPEN/CLOSE button 7. The PLAY/PAUSE/USB button (playback/ stop playback of CD/MP3/USB/SD/MMC, press and hold this button for more than 1,5 seconds to change a media device CD/ USB) 8 . The BACK button - return to the previous track (press and hold this button for more than 1, 5 seconds to fast rewind) 9. FM -antenna 10. The NEXT button - move to the next track (press and hold this button for more tha...