Votos - , Puntuación media:
(
)
)
Fabricar: JVC
Tamaño del archivo: 749.54 kb
Nombre del archivo: 4ffbfbfe-ded6-6d24-ad31-5090a1c14893.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
To change the display information while receiving an FM RDS station Press DISP. Each time you press the button, the display changes as follows: PS NAME (Station name) FREQ (Station frequency) CLOCK (Clock time) PTY (Programme type) When an FM stereo broadcast is hard to receive: Press MO/RND (mono/random) while listening to an FM stereo broadcast.The MO (mono) indicator lights up on the display. The sound you hear becomes monaural but reception will be improved. MO/RND Lights up when receiving an FM broadcast in stereo. ENGLISH To restore the stereo effect, press the button again. 7 ENGLISHENGLISH RDS OPERATIONS What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the station send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc. Another advantage of RDS function is called “EON (Enhanced Other Networks).” The EON indicator lights up while receiving an FM station with the EON data. By using the EON data sent from a station, you can tune into a different station of a different network broadcasting your favorite programme or traffic announcement while listening to another programme or to another source such as tape. By receiving the RDS data, this unit can do the following: • Tracing the same programme automatically (Network-Tracking Reception) • Standby Reception of TA (Traffic Announcement) or your favorite programme • PTY (Programme Type) search • TP (Traffic Programme) search • And some other functions Tracing the same programme automatically (Network- Tracking Reception) When driving in an area where FM reception is not good, the tuner built in this unit automatically tune in another RDS station, broadcasting the same programme with stronger signals. So, you can continue to listen to the same programme in its finest reception, no matter where you drive. (See the illustration on the next page.) Two types of the RDS data are used to make Network-Tracking Reception work correctly — PI (Programme Identification) and AF (Alternative Frequency). Without receiving these data correctly from the RDS station you are listening to, Network- Tracking Reception will not operate. To use Network-Tracking Reception, press and hold TP/RDS (Traffic Programme/Radio Data System) for more than 1 second. Each time you press and hold the button, Network-Tracking Reception modes change as follows: TP RDS Mode 1 Mode 2 Mode 3 8 Mode 1 The AF indicator lights up but the REG indicator does not. Network-Tracking is activated with Regionalization set to “off.” Switches to another station within the same network when the receiving signals from the current station become weak. Note: In this mode, the programme may differ from the one currently received. Mode 2 Both the AF indicator and the REG indicator light up. Network-Tracking is activated with Regionalization set to “on.” Switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak. Mode 3 Neither the AF indicator nor the REG indicator lights up. Network-Tracking is deactivated. The same programme can be received on different frequencies. Programme 1 broadcasting on frequency E Programme 1 broadcasting on frequency A Programme 1 broadcasting on frequency B Programme 1 broadcasting on frequency C Programme 1 broadcasting on frequency D ENGLISH 9 ENGLISH Using Standby Reception Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source — another FM station and Tape or CD changer. Note: Standby Reception will not work if you are listening to an AM station. TA Standby Reception TP RDS • When you press TP/RDS while listening to an FM station, the TP indicator is lit during reception of a TP (Traffic Programme) station and the TA standby mode is engaged. Note: When the station being received is not a TP station, the TP indicator flashes. Press . or 4 to engage the TA standby mode. “SEARCH” appears on the display, and TP station search starts. When a TP station is tuned in, the TP indicator is lit. • If you are listening to a tape or CD changer, and wish to listen to a TP station, press TP/RDS or TP to enter the TA standby mode. (The TP indicator lights up.) If a traffic programme starts broadcasting while the TA standby mode is active, “TRAFFIC” appears and the playback source changes to the FM band. The volume increases to the preset TA volume level and the traffic programme can be heard (see page 14). To deactivate the TA standby mode, press TP/RDS again. PTY Standby Reception PTY • When you press PTY while listening to an FM station, the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged. The selected PTY name stored on page 12 flashes for 5 seconds. Note: When the station being received is...
Otros modelos de este manual:Receptores - KS-FX463R (749.54 kb)