Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
The sooner RSI/ CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented. WARNING DANGER Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments, or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual. • Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed. • Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found. • Inspect hand guard for damage. Replace if damaged or missing. • Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used. 6 6 N WARNING DANGER Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manuals • Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation. Clear the Work Area • Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use. Keep a Firm Grip • Hold the front and rear handles with both hands, with thumbs and fingers encircling the handles. Keep a Solid Stance • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach. Avoid Hot Surfaces • Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation. WARNING DANGER Never perform blade maintenance procedures while engine is running. EMISSION CONTROL EPA Phase 2 The emission control system for this engine is EM (Engine Modification). Emission Control Label (located on Engine) (EXAMPLE ONLY, information on label varies by FAMILY). IMPORTANT ENGINE INFORMATION ENGINE FAMILY: 4EHXS.0214ED DISPLACEMENT: 21.2 CC EMISSION COMPLIANCE PERIOD : 300 HRS. THIS ENGINE MEETS U.S. EPA PHA 2 EMISSION REGULATIONS FOR SMALL NON ROAD ENGINE. REFER TO OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS. PRODUCT EMISSION DURABILITY The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual. HEDGE CLIPPER OPERATOR'S MANUAL 7 DESCRIPTION After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. CONTENTS __ 1 -Hedge Clipper Assembly __ 1 -Operator’s Manual __ 1 -Safety Manual __ 1 -Warranty Statement __ 1 -Warranty Registration Card __ 1-T-Wrench 13 x 19 __ 1 -Blade Stiffener __ 4 -Blade Locknuts __ 4 -Stiffener Washers __ 1 -Echo Power Blend TM 2-stroke oil sample __ 1 -Blade Cover 1 15 2 4 7 8 9 5 6 10 11 12 13 14 3 17 16 . FRONT HANDLE / GUARD - Comfortable, textured finish provides anti-slip grip for front hand. Guard protects hand from the blades. Warning decals are located on guard. 2. BLADES - Double reciprocating blades mounted to a blade support bar. The blades are double sided, capable of cutting on either side. 3. BLADE STIFFENER -Attaches to top of blades and guides material being cut into blades. 4. SPARK PLUG - Provides spark to ignite fuel mixture. 5. CHOKE - The choke control lever is located on the front of the air cleaner case. Move choke lever to "COLD START" ( ) to close the choke for Cold Starting. Move choke lever to "RUN" ( ) position to open choke. 6. PRIMER BULB - Pumping primer bulb before starting engine draws fresh fuel from the fuel tank priming the carburetor for starting. Pump primer bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times. 7. AIR CLEANER - Contains replaceable filter element. 8. RECOIL STARTER HANDLE - Pull handle slowly until recoil starter engages, then quickly and firmly. DO NOT pull rope all the way out or allow the handle to snap back, damage to the starter will occur. 9. FUEL TANK- Contains fuel and fuel filter. 10. FUEL TANK CAP - Covers and seals fuel tank opening. 11. REAR HANDLE - Contains Stop Switch, Throttle Lockout and Throttle Trigger. 12. THROTTLE TRIGGER LOCKOUT - This lever must be depressed before Throttle Trigger can be activated. 13. THROTTLE TRIGGER - Spring loaded to return to idle when released. Trigger Lockout must be depressed fully before Throttle Trigger will move. During acceleration, depress gradually for best operating technique. 14. STOP SWITCH -"TOGGLE SWITCH" located on the left side of the rear handle. Move switch UP to RUN, DOWN to STOP. 15. SPARK ARRESTOR - CA...