Votos - 2, Puntuación media: 4.5
(
)
)
|
Fotos y especificaciones Husqvarna 240F |
Resumen del manual
X English – 33 TECHNICAL DATA Technical data Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various working conditions with the following time distribution: 1/2 idling and 1/2 max speed. NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting attachments for the machine. The table indicates the lowest and highest values. Technical data 240R 240F Engine Cylinder displacement, cm3 40,2 40,2 Cylinder bore, mm 40,0 40,0 Stroke, mm 32 32 Idle speed, rpm 2700 2700 Recommended max. speed, rpm 12500 12500 Speed of output shaft, rpm 9190 9190 Max. engine output, acc. to ISO 8893 1,8/9000 1,8/9000 Catalytic converter muffler No No Speed-regulated ignition system No No Ignition system Manufacturer/type of ignition system EM/ET EM/ET Spark plug NGK BPMR 7A/ Champion RCJ 7Y NGK BPMR 7A/ Champion RCJ 7Y Electrode gap, mm 0,5 0,5 Fuel and lubrication system Manufacturer/type of carburettor Walbro WT Walbro WT Fuel tank capacity, litre 0,8 0,8 Weight Weight without fuel, cutting attachment and guard, kg 8,6 8,4 Noise emissions (see note 1) Sound power level, measured dB(A) 114 114 Sound power level, guaranteed LWA dB(A) 114 116 Noise levels (see note 2) Equivalent noise pressure level at the operator’s ear, measured according to EN/ISO 11806 and ISO 7917, dB(A), min./max.: 100/104 98/101 Vibration levels Vibration levels at handles, measured according to EN/ ISO 11806 and ISO 7916, m/s2 At idle, left/right handles, min.: 2,1/2,1 3,2/3,0 At idle, left/right handles, max.: 2,4/2,8 3,8/4,1 At max. speed, left/right handles, min.: 2,9/2,4 1,9/2,4 At max. speed, left/right handles, max.: 4,0/3,5 4,2/4,7 34 – English TECHNICAL DATA Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various working conditions with the following time distribution: 1/2 idling and 1/2 max speed. NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting attachments for the machine. The table indicates the lowest and highest values. Technical data 250R 252RX 265RX Engine Cylinder displacement, cm3 48,7 50,8 65,1 Cylinder bore, mm 44 45 48 Stroke, mm 32 32 36 Idle speed, rpm 2700 2700 2250 Recommended max. speed, rpm 12500 14000 11500 Speed of output shaft, rpm 9190 10300 9120 Max. engine output, acc. to ISO 8893 2,1/9000 2,4/9000 3,0/8400 Catalytic converter muffler No No No Ignition system Manufacturer/type of ignition system EM/ET EM/ET SEM GA 6CD Spark plug NGK BPMR 7A/ Champion RCJ 7Y NGK BPMR 7A/ Champion RCJ 7Y NGK BPMR 7A/ Champion RCJ 7Y Electrode gap, mm 0,5 0,5 0,5 Fuel and lubrication system Manufacturer/type of carburettor Walbro HDA Walbro HDA Tillotson HS Fuel tank capacity, litre 0,8 0,8 1,0 Weight Weight without fuel, cutting attachment and guard, kg 9,2 8,9 10,8 Noise emissions (see note 1) Sound power level, measured dB(A) 112 112 115 Sound power level, guaranteed LWA dB(A) 114 114 116 Noise levels (see note 2) Equivalent noise pressure level at the operator’s ear, measured according to EN/ISO 11806 and ISO 7917, dB(A), min./max.: 97/104 96/103 98/100 Vibration levels Vibration levels at handles, measured according to EN/ ISO 11806 and ISO 7916, m/s2 At idle, left/right handles, min.: 2,7/3,2 2,8/2,8 4,5/4,0 At idle, left/right handles, max.: 3,5/6,0 4,5/3,9 5,1/4,6 At max. speed, left/right handles, min.: 1,0/1,0 1,2/1,4 3,0/3,9 At max. speed, left/right handles, max.: 2,1/2,0 1,6/1,7 3,9/5,1 English – 35 TECHNICAL DATA Approved accessories 240R, 240F Type Cutting attachment guard, Art. no. Centre hole in blades/cutters, O 20 mm Output shaft thread M12 Grass blade/grass cutter Multi 255-3 (O 255 3 teeth) 502 26 34-01 Multi 275-4 (O 275 4 teeth) 502 26 34-01 Multi 300-3 (O 300 3 teeth) 502 26 34-01 Saw blade Maxi XS 200-22 (O 200 22 teeth) 502 27 22-01 Plastic blades Tricut O 300 mm 503 91 60-01 / 502 26 34-01 Trimmer head Trimmy S 503 91 60-01 Trimmy S II 503 91 60-01 Auto 55 503 91 60-01 Support cup Fixed - With ball bearing - Approved accessories 250R Type Cutting attachment guard, Art. no. Centre hole in blades/cutters, O 20 mm Output shaft thread M12 Grass blade/grass cutter Multi 255-3 (O 255 3 teeth) 502 26 34-01 Multi 275-4 (O 275 4 teeth) 502 26 34-01 Multi 300-3 (O 300 3 teeth) 502 26 34-01 Saw blade Maxi XS 200-22 (O 200 22 teeth) 502 27 22-01 Maxi XS 225-22 (O 225 22 teeth) 502 03 94-03 Plastic blades Tricut O 300 mm 503 91 60-01 / 502 26 34-01 Trimmer head Trimmy S 503 91 60-01 Trimmy S II 503 91 60-01 Auto 55 503 91 60-01 Support cup With ball bearing - Chopping blade - Set 537 16 55-01 Approved accessories 252RX Type Cutti...
Otros modelos de este manual:Clippers - 240R (2.88 mb)