Iniciar sesión:
Votos - 3, Puntuación media: 4.3 ( )

Manual de usuario Melissa, modelo 638-143

Fabricar: Melissa
Tamaño del archivo: 150.45 kb
Nombre del archivo: f54d8bd8-0e68-457e-b00d-8a640c1a5b5b.pdf
Idioma del manual:ruplhrenfrhuskcs
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


.............17 RU Mашинка для стрижки волос c aккyмyлятopoм ................20 HR Punjivi set za sisanje................... ............................................23 GR ................ ...... ......................................26 F Tondeuse rechargeable.. .........................................................29 UK Please read this instruction manual carefully and familiarise yourself with your new hairtrimmer, before using for the first time. Please retain this manual for future reference. IMPORTANT SAFEGUARDS When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following: - Unplug the appliance before cleaning. - Do not place or store appliance where it can fall or be pulled into a tub or sink. - Do not use while bathing or in a shower - Do not place in, or drop into, water or any other liquid. - Do not reach for an appliance that has fallen into water. Unplug immediately. - Use the appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. - This appliance should never be left unattended when plugged in. - Close supervision is necessary when this appliance is used by, on, or near children or invalids. - Never operate this appliance if it has a damaged cord or plug, or if it is not working properly. - Keep the cord away from heated surfaces. - Do not pull, twist, or wrap line cord around appliance. - Never drop or insert any object into any opening on this appliance. - Before use, make sure certain blades are aligned properly. - Do not place the appliance on any surface while it is operating. - Do not use this appliance with a damaged or broken comb nor with teeth missing from the blades as injury may occur. CONTENTS OF BOX Hair trimmer unit Charging base Adapter and power feed plug Comb Scissors Oil Brush CHARGING BEFORE USING - Turn switch to 0 position and insert the unit into the charging base. - Insert power feed plug (adapter) into the charging base socket. - Insert adapter plug into outlet. - During charging, the LED indicator lamp lights up. - Charging can only be done with unit switch at 0 position. - After charging, unplug adapter and power feed plugs. - Charging time is 7 hours. 22 -The unit can operate for about 25 mins. after full charge. For charging the hairtrimmer, press the unit into the charger until the light indicator ignites. Be sure that the charger is connected to the outlet. DIRECT-POWERED BY ADAPTOR - The proclipper can also be powered directly by the adapter. - Plug the power feed plug of adapter direct into the unit socket. Then plug the adapter to the proper AC outlet. - Do not operate for more than 25 mins. continuously. Allow the unit to rest for approx. 10 mins. and oil the blades after every 25 mins. of operation, in order to maintain efficient cutting performance. - If the clipper should not run immediately due to a completely empty cell, recharge the trimmer for approx. 1 minute before cord operation. OIL BEFORE USING - Always oil before and after use. Cutting performance deteriorates if cutting blades are not oiled properly. When doing more than one haircut in one session, clean and oil blades once after finishing each cut. - Remove cutting head in direction of arrow. - Apply about 1 to 2 drops of accessory oil at the cutting blades. - Slide back the cutting head to the unit. - Allow the unit to operate without actual cutting for about 10 seconds and wipe off any excess oil. - The oil contains kerosene and is extremely dangerous if swallowed. Keep the oil away from children. - Do no use hair-oil or hair-vax. CONNECTION AND ADJUSTMENT OF ATTACHMENT COMB - The attachment comb has 6-position adjustment, which provides 7,10,13,16,18 and 21 mm. cutting length. - The comb is fixed to the clipper by 2 locks at both sides of the guide groove of attachment. - Push attachment knob upward with finger to set the desired cutting length as shown in the figure. - Press on comb portion of attachment to make sure that it is locked to the body. INSTRUCTIONS FOR HAIR CUTTING - Inspect the clipper, making sure that it is free of oil between the cutting blade teeth and turn the unit on to distribute the oil and to make sure it is running smoothly. Wipe of any excess oil. This should be done after each use. While using the unit, untwist the cord from time to time to avoid tangling. - Seat the person so his/her head is approximately at your eye level. This allows ease of visibility while cutting and a relaxed control of the unit. - Before cutting, always first comb the hair so it is tangle free and as it is naturally worn. - Place a towel around the neck and shoulders of the person having the haircut. 33 REMINDERS - Cut the hair in a relaxed and slow manner. Use short strokes only to work gradually over the entire head. - Always take off a little hair at a time; you can always trim off additional hair later. - As you wor...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría