Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 2.48 mb Nombre del archivo: Idioma del manual:

Corded clipping 1 2 Switch off the appliance. Connect the appliance to the mains and wait a few seconds before you switch it on. Note: If the battery is completely empty, wait a few minutes before you switch on the appliance. Using the appliance Make sure your hair is clean and dr y. Do not use the appliance on freshly washed hair. Preparing for hair clipping 1 Comb your hair with a styling comb in the direction of hair growth. Clipping with comb attachment 1 Insert the edge of the comb attachment into the swivel head. Make sure the comb attachment locks into position properly Note: The length settings are indicated on the comb attachment. 2 Turn the length setting adjustment ring to set the comb attachment to the desired setting. ,, The arrowhead on the appliance indicates which setting you have selected. Tip: Use different settings to create a natural and smooth transition between the various hair lengths from your neckline to the top of your head. Do not turn the length setting adjustment ring beyond the highest setting. – 3 mm – 5 – 7 – 9 – 11 – 15 – 5 – 7 – 9 – 11 – 15 10 English – 3 mm – 5 – 7 – 3 mm– 5– 7 ENglIsH 11 3 Turn the swivel head to the position that is most comfortable for your arm when you clip the different parts of your head. Using the swivel head -From its star ting position of 0° (pointing forwards), you can turn the swivel head 45° or 90° to the left or right. This enables you to adjust the position of the cutting element to the par t of your head that you are clipping.This makes it much easier to clip your own hair. -To set the cutting element to the desired position, turn the swivel head (‘click’). Note: Always adjust the position of the cutting element by turning the swivel head. Do not turn the cutting element or the comb attachment. Note: Do not turn the swivel head more than 90° to the left or right. -The swivel head allows you to hold and use the appliance like a styling comb. 4 Press the on/off button to switch on the appliance. QC5570: Press the button briefly. QC5580: Press the button for 2 seconds. 5 6 Move the clipper through the hair slowly. Regularly remove cut hair from the comb attachment. If a lot of hair has accumulated in the comb attachment, remove the comb attachment from the appliance and blow and/or shake the hair out of it. When you remove the comb attachment, the selected setting does not change. 12 ENglIsH Tips -We advise you to star t clipping at the highest setting of the regular comb attachment and to reduce the setting gradually. -To clip most effectively, move the appliance against the hair growth direction. -Since all hair does not grow in the same direction, you need to move the appliance in different directions (upwards, downwards and across). -Make sure that the flat par t of the comb attachment is always fully in contact with the scalp to obtain an even result -Write down the settings you use to create a cer tain hairstyle as a reminder for future clipping sessions. Contouring without comb attachment You can use the appliance without comb attachment to clip your hair ver y close to the skin (0,5mm) or to contour the neckline and the area around the ears. Be careful when you clip without comb attachment because the cutting element removes every hair it touches. 1 Pull the comb attachment off the swivel head. Never pull at the flexible top of the comb attachment. Always pull at the bottom part. 2 3 4 Comb the hair ends over the ears before you start to contour the hairline. Press the on/off button to switch on the appliance. When you shape the contours around the ears, tilt the appliance in such a way that only one edge of the cutting element touches the hairends. – 5– 7– 9– 11– 15 5 To contour the neckline and the sideburns, turn the appliance and make downward strokes. Note: Move the appliance slowly and smoothly. Just follow the natural hairline. 6 Adjust the position of the swivel head to make contouring easier. Cleaning and maintenance Clean the appliance every time you have used it by rinsing it under the tap or with the cleaning brush supplied. Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol, acetone or ethereal oils to clean the appliance. Be careful that the cutting element does not fall on the floor. Cleaning the cutting element and comb attachments 1 Switch off the appliance and disconnect it from the mains. 2 Remove the comb attachment. 3 Rinse the comb attachment under the tap or clean it with the cleaning brush supplied. 4 Place your thumb in the center of the round side of the cutting element and your index finger on the teeth of the cutting element (1). Use your index finger to lift the cutting element from the swivel head (2). – 3 mm – 5 – 7 – 9 – 11 – 15 English 13 14 ENglIsH 5 Rinse the cutting element under the tap or cle...

Descargar ahora

Introduzca dos números de la imagen: