Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Hold the appliance with the trimming head pointing upwards and make downward strokes with the broad side of the trimming head. Using the precision trimmer The precision trimmer is only half as wide as the broad side of the trimming head. It therefore allows more precise styling of the area around the ears, the sideburns and also around the mouth and under the nose. 1 To use the precision trimmer, simply turn the cutting unit until the precision trimmer points towards the front of the appliance. 2 Press the trimming head on/off button to switch on the trimming head. 3 Hold the appliance with the trimming head pointing upwards and make downward strokes with the precision trimmer. Shaving Before you use the shaving head, always check it for damage or wear. If the shaving head is damaged or worn, do not use it, as injury may occur. Replace a damaged shaving head before you use it again (see chapter ‘Replacement’). 1 Hold the appliance in the shaving position, with the shaving head pointing upwards and the trimming head pointing downwards. 2 Press the shaving head on/off button once to switch on the shaving head. ,, QS6160 only: The on/off button lights up to indicate that the shaving head is operating. 3 Place the shaving head on the skin and move the appliance against the direction of hair growth while you press it lightly. Tip -- Make sure that the shaving head is in full contact with the skin. -- You can switch on the shaving head while the trimming head is operating. If you do this, the trimming head is switched off immediately. English 11 12 EngliSh 4 To switch off the shaving head after use, press the shaving head on/off button again. Overload protection If you press the trimming head or shaving head too hard onto your skin or if its cutting element gets blocked (e.g. by clothes etc.), the on/off button of the blocked trimming head or shaving head flashes quickly (QS6160 only) and the appliance switches off automatically. Remove whatever is blocking the cutting elements before you use the appliance again. Cleaning and maintenance Clean the appliance after ever y use. Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Only clean the appliance and the adapter with the cleaning brush supplied. Note:The trimming head and shaving head do not need any lubrication. Cleaning the trimming head Switch off the appliance. Pull the comb off the trimming head. Clean the trimming head under the tap. 1 2 3 Cleaning the trimming head connector Note: Make sure you clean the trimming head connector at least once every three months. 1 Switch off the appliance. EngliSh 13 2 Gently pull the trimming head off the appliance. 3 4 5 Remove the hairs from the inside of the trimming head connector with the cleaning brush. Clean the inside of the trimming head with the cleaning brush. After cleaning, put the trimming head back onto the appliance. Cleaning the shaving head 1 Switch off the appliance. 14 EngliSh 2 Pull the shaving head off the appliance. Note:The shaving head is very delicate. Handle it carefully. Replace the shaving head if it is damaged. 3 Rinse the shaving head with lukewarm water. Do not clean the shaving head with the cleaning brush, as this may cause damage. 4 Remove hairs from the cutters with the cleaning brush. 5 After cleaning, snap the shaving head back onto the appliance (‘click’). Replacement In case of frequent use, replace the shaving foil and the cutters ever y year. Shaving foil 1 2 3 Pull the shaving head off the appliance. Remove the old shaving foil from the shaving head. Snap the new shaving foil into the shaving head (‘click’). EngliSh 15 Cutters 1 2 3 Pull the shaving head off the appliance. Remove the cutters. Snap the new cutters onto the appliance (‘click’). Storage You can fold the charger for easy travelling or storage. 1 To fold the charger: fold the base of the charger against the appliance holder. 2 Put the protection cap on the shaving unit. travel lock (Qs6160 only) The appliance has an integrated travel lock which prevents the appliance from accidentally being switched on during travel. 1 To activate the travel lock, press and hold the trimming head on/offbutton, the shaving head on/off button or both for at least 4 seconds while the travel lock indication flashes 3 times. The travel lock is only activated when the indication lights up , continuously. 2 To deactivate the travel lock, press and hold the trimming head on/off button, the shaving head on/off button or both for at least 4 seconds while the travel lock indication flashes 4 times. The travel lock is now deactivated and the appliance switches on. , Note:The travel lock can also be deactivated by charging the appliance. Ordering accessories To purchase accessories for this appliance, please visit our online shop at If the online shop is not available in your countr y, go to your Philips dealer or a Philips ser vi...
Otros modelos de este manual:Clippers - QS6140/41 (10.79 mb)
Eléctrico - QS6160/41 (10.79 mb)