|
Resumen del manual
14.Avoid unintentional starting Do not carry the tool with a finger on the on/off switch. Be sure that the tool is switched off when plugging in. 15.Do not abuse cord Never carry the tool by its cord or pull it to disconnect from the socket. Keep the cord away from heat, oil and sharp edges. 16.Store idle tools When not in use, tools should be stored in a dry, locked up or high place, out of reach of children. 17.Maintain tools with care Keep cutting tools sharp and clean for better and safer performance. Follow the instructions for maintenance and changing accessories. Keep handles and switches dry, clean and free from oil and grease. 7 ENGLISH ENGLISH 18.Repairs This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user. Additional safety instructions for hedgetrimmers Wear safety glasses or goggles when operating this tool. Wear gloves when operating this tool. Wear ear protection when operating this tool. Immediately disconnect the cable from the mains if it is damaged or cut. Do not expose the tool to rain or high humidity. . Keep the cable away from the blades while using this tool. . If you have not used a hedgetrimmer before, preferably seek practical instruction by an experienced user in addition to studying this manual. . Never touch the blades while the tool is running. . Never attempt to force the blades to come to a standstill. . Do not put the tool down until the blades have come to a complete standstill. . Regularly check the blades for damage and wear. Do not use the tool when the blades are worn or damaged. . Take care to avoid hard objects (e.g. metal wire, railings) when trimming. Should you accidentally hit any such object, immediately switch the tool off and check for any damage. . Should the tool start to vibrate abnormally, immediately switch it off and check for any damage. . If the tool stalls, immediately switch it off. Unplug the tool before attempting to remove any obstructions. . After use, place the blade sheath supplied over the blades. Store the tool, making sure that the blade is not exposed. . Always ensure that all guards are fitted when using the tool. Never attempt to use an incomplete tool or a tool with unauthorised modifications. . Never allow children to use the tool. Additional safety instructions for Australia and New Zealand . This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance. . If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. ELECTRICAL SAFETY The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate. This tool is double insulated in accordance with EN 50144; therefore no earth wire is required. Mains plug replacement (U.K. & Ireland only) . Should your mains plug need replacing and you are competent to do this, proceed as instructed below. If you are in doubt, contact an authorised repair agent or a qualified electrician. 8 ENGLISH ENGLISH . Disconnect the plug from the supply and remove the fuse from the plug. . Cut off the plug and dispose of it safely; a plug with bared copper conductors is dangerous if engaged in a live socket outlet. . Only fit 13 Amperes BS1363A approved plugs fitted with the correctly rated fuse (1). . The cable wire colours, or a letter, will be marked at the connection points of most good quality plugs. Attach the wires to their respective points in the plug (see above). Brown is for Live (L) (2), blue is for Neutral (N) (4). . Before replacing the top cover of the mains plug ensure that the cable restraint (3) is holding the outer sheath of the cable firmly and that the leads are correctly fixed at the terminal screws. . If the plug has a fuse cover, make sure that the fuse cover is fitted. Do not use the plug if the fuse cover is missing or damaged. Never use a light socket. Using an extension cable Always use an approved extension cable suitable for the power input of this tool (see technical data). The extension cable mus...
Otros modelos de este manual:Clippers - GT249 (970.51 kb)
Clippers - GT25 (970.51 kb)
Clippers - GT250 (970.51 kb)