Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Electrolux Tamaño del archivo: 556.44 kb Nombre del archivo: 3f858f4f-0b60-49b5-a6f8-ec4a7a994de4.pdf Idioma del manual:

NEVER modify or remove safety devices. Read, understand, and follow all instructions in the manual and on the machine before starting. Understand: • How to operate all controls • The functions of all controls • How to STOP in an emergency. DO NOT attempt to start your engine until you know what the controls do and how they work. DO NOT tilt trimmer when starting it. Keep feet away when starting engine. DO NOT operate trimmer unless trimmer shield and trailing shield are installed. Objects may be picked up and thrown causing damage or personal injury. NEVER use wire or wire-rope in place of the cutting line. It can break off and become a dangerous projectile. Use only flexible, nonmetallic line recommended by Ariens. ALWAYS keep trimmer head in contact with the ground while operating. Take all possible precautions when leaving unit unattended. ALWAYS shut off engine and disconnect spark plug wire to prevent accidental starting or unauthorized use. Stop engine if anyone enters the work area. NEVER attempt to make any adjustments to unit while engine is running (except where specifically recommended). Stop engine, disconnect spark plug wire and wait for all moving parts to stop before servicing. DO NOT make cutting height adjustments while the engine is running. If you strike an object, or if equipment vibrates abnormally, stop engine at once, wait for moving parts to stop and disconnect wire from spark plug. Repair any damage before restarting unit. ALWAYS shut off engine, allow trimmer head to stop and disconnect spark plug wire before clearing clogs or cleaning unit. DO NOT transport machine while engine is running. To reduce fire hazard and overheating, keep equipment free of grass, leaves, debris or excessive lubricants. Use extra care when approaching blind corners, shrubs, trees, or other objects which may obscure vision. DO NOT trim at too fast a rate. DO NOT change engine governor setting or over-speed the engine. Do not operate trimmer on gravel or on loose material such as sand. Stop trimmer when crossing gravel drives, walks, or roads to prevent damage or injury from thrown objects. DO NOT pull trimmer backwards unless absolutely necessary. Look down and back, especially for small children, before and while moving backwards. DO NOT operate on steep slopes. NEVER leave unit unattended on a slope. Chock wheels if parking on a slope. Trim across the face of slopes, never up and down. Be especially cautious when changing direction on slopes. GB - 5 This product is equipped with an internal combustion engine. DO NOT use on or near any unimproved, forest or brush covered land unless the exhaust system is equipped with a spark arrestor meeting applicable local, state or federal laws. A spark arrestor, if used, must be maintained in effective working order by the operator. See your Ariens Dealer or engine manufacturer’s service center. This product is equipped with an internal combustion engine. DO NOT use on or near any unimproved, forest or brush covered land unless the exhaust system is equipped with a spark arrestor meeting applicable local, state or federal laws. A spark arrestor, if used, must be maintained in effective working order by the operator. See your Ariens Dealer or engine manufacturer’s service center. • NO Smoking! • NO Sparks! • NO Flames! • Allow engine to cool before filling fuel tank. Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling. When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle. Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock- open device. Check fuel supply before starting engine. DO NOT fill gasoline tank indoors, when engine is running, or while engine is hot. Allow engine to cool several minutes before removing fuel cap. DO NOT overfill. Allow about 1/4" (6 mm) of tank space for fuel expansion. Replace gasoline tank cap securely and clean any spilled fuel before starting engine. If fuel is spilled on clothing, change clothing immediately. NEVER store fuel inside where there is an open flame, such as a water heater. ALWAYS drain fuel outdoors away from ignition sources. Avoid Electric Shock. DO NOT disconnect wire from spark plug while engine is running. Accidental engine start up can cause death or serious injury. Except where specifically recommended, ALWAYS stop engine, wait for moving parts to stop, allow parts to cool and disconnect spark plug wire before inspecting, servicing, adjusting or repairing unit. Keep unit free of grass, leaves, or other debris build-up. Keep equipment in good condition. Maintain or replace safety and instruction labels, as necessary. Follow engine manufa...

Descargar ahora

Introduzca dos números de la imagen: