Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Personal safety: -Take the necessary precautions to avoid unintentionally turning on the appliance. -Before using the appliance ensure that the tool is properly fixed in place. -Do not touch any of the appliance’s moving parts while it is operating. Use and care: -Fully unroll the appliance’s power cable before each use. -Do not use the appliance if the parts or accessories are not properly fitted. -Do not use the appliance if joinable accessories are faulty. Replace them immediately. -Do not use the appliance if the on/off switch does not work. -If you use the appliance in a bathroom or similar place, unplug the appliance from the mains when it is not in use, even if it is only for a short while, as proximity to water involves a risk, even if the appliance is disconnected. -Disconnect the battery charger from the mains when not in use and before undertaking any cleaning task. -This appliance is not a toy. Children should be supervised to ensure that they do not play with the appliance. -This appliance is intended for adult use. Ensure that this product is not used by the disabled, children or people unused to its handling. -This appliance is for household use only, not professional or industrial use. -This appliance should be stored out of reach of children and/or the disabled. -Do not use the appliance on pets or animals. -Do not leave the appliance resting on surfaces when it is still switched on. -Keep and store the appliance in a dry place, free from dust and away from sunlight. -This appliance was oiled during the manufacturing process. To keep the appliance in good working condition, we recommend that you oil the blades every time the appliance is cleaned by pouring some drops of oil on the blade and turning the appliance on for a few seconds. -Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void. Charging the battery Warning: The new battery does not come completely charged and must be charged up to the maximum before using the appliance for the first time. -Charge the battery at room temperature between 4 and 40.C. -Plug the charger in to the electric mains. -The time needed to charge completely is 8 hours approximately. Never try to overcharge the batteries (although it is recommended that the batteries are charged for 10 hours for the first time). -Plug in the charger connector to the appliance’s electrical input, situated on the back/lower part of the appliance. -When the battery is charging, the pilot light will turn red, indicating that the charger is on. It will turn green once charging is complete. -The pilot light will remain green while turned on. Once flat the pilot light will switch off. -When charging has finished, unplug the charger from the mains. Instructions for use Assembly of accessories: -To fix the comb guide, take it by the ends and press it against the razors of the appliance until firmly fixed in place. -To dry just pull out. MA_20001_IM.indd4 44 MA_20001_IM.indd 5/20/20105/20/2010 11:46:17 AM 11:46:17 AM Use: The appliance can be used connected to the electric mains or with batteries. -Connect the appliance to the mains. -Turn appliance on, pressing the On/Off switch. How to cut hair -Situate the person whose hair you are going to cut so that the top of their head is at your eye level. Place a protective towel or cloth around their neck. -To obtain best results it is better to use the appliance on dry hair, as it is much easier to control the hair and the result. -Comb hair well before cutting. Make sure that there are no tangles or knots. -Hold the appliance in a calm and relaxed manner in order to ensure maximum control of the cut and a uniform result. Proceed to use short cuts gradually going around the head. -Leave the hair a little longer than the desired length as it can always be altered later. -While working adapt the comb/comb guide to the desired length. -At regular intervals, stop cutting in order to comb the hair and check the results so far. Step 1 Nape -Attach comb guide #1 or #2. -Hold the appliance with the razor facing downwards and begin to cut the hair from the base of the neck. -Make some upward movements, raising the appliance gradually and away from the head, cutting the hair gradually until the height of the ears (Fig 1) Step 2 The back of the head -Attach comb guide #3, #4, # 5, #6, # 7 or # 8 and continue with the back of the head (Fig 2) Step 3 The side of the head -Attach a new shorter comb guide (#1 or #2) to trim the sideburns. -Attach the longest comb (#3, #4, #5, #6, # 7 or # 8) again and continue until you reach the top of the head. Step 4 The top of the head -Using comb guide #3, #4 or # 5, pass the appliance from the back to the front, against the growth of the hair (Fig 3). In some cases it’s necessary to go over what you have done a second time from front to back. -The comb guide #1 or #2 is for when you want to achieve a more precise cut. -Use comb guides #6, # 7 o #...