Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
(Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) ► M.I.T. Current Status This screen provides information on CPU/memory frequencies/parameters. ► Advanced Frequency Settings CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Advanced Frequency Settings CPU Clock Ratio [22X] CPU Frequency 2.93GHz (133x22) ► Advanced CPU Core Features [Press Enter] QPI Clock Ratio [Auto] QPI Link Speed 4.8GHz >>>>> Standard Clock Control Base Clock(BCLK) Control [Disabled] x BCLK Frequency (Mhz) 133 Extreme Memory Profile (X.M.P.) (Note) [Disabled] System Memory Multiplier (SPD) [Auto] Memory Frequency (Mhz) 1333 1333 Internal Graphics Clock 733 [Auto] PCI Express Frequency (Mhz) [Auto] >>>>> Advanced Clock Control CPU Clock Drive [900mV] PCI Express Clock Drive [900mV] CPU Clock Skew [0ps] PCH Clock Skew [0ps] Item Help Menu Level ► : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults (Note) This item appears only if you install a memory module that supports this feature. - 3б - BIOS Setup ö* CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. o- CPU Frequency Displays the current operating CPU frequency. ► Advanced CPU Core Features o- Intel(R) Turbo Boost Tech.|Note| Allows you to determine whether to enable the Intel CPU Turbo Boost technology. Auto lets the BIOS automatically configure this setting. (Default: Auto) o- CPU Cores Enabled |Note| Allows you to determine whether to enable all CPU cores. ►►All Enables all CPU cores. (Default) ►► 1 Enables only one CPU core. ►►2 Enables only two CPU cores. ►►3 Enables only three CPU cores. o- CPU Multi-Threading |Note| Allows you to determine whether to enable multi-threading technology when using an Intel CPU that supports this function. This feature only works for operating systems that support multi-processor mode. (Default: Enabled) o- CPU Enhanced Halt (C1E) |Note| Enables or disables Intel CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. Auto lets the BIOS automatically configure this setting. (Default: Auto) (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. BIOS Setup - 36 - O- C3/C6/C7 State Support |Note 11 Allows you to determine whether to let the CPU enter C3/C6/C7 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. The C3/C6/C7 state is a more enhanced power-saving state than C1. Auto lets the BIOS automatically configure this setting. (Default: Auto) o- CPU Thermal Monitor |Note 11 Enables or disables Intel CPU Thermal Monitor function, a CPU overheating protection function. When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated. Auto lets the BIOS automatically configure this setting. (Default: Auto) CPU EIST Function |Note 11 Enables or disables Enhanced Intel SpeedStep Technology (EIST). Depending on CPU loading, Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. Auto lets the BIOS automatically configure this setting. (Default: Auto) o- Bi-Directional PROCHOT |Note 11 ►►Auto Lets the BIOS automatically configure this setting. (Default) ►► Enabled When the CPU or chipset detects that an overheating is occurring, PROCHOT signals will be emitted to lower CPU performance to decrease heat production. ►► Disabled Only allows the CPU to detect whether an overheating is occurring to emit PROCHOT signals. QPI Clock Ratio Allows you to set the QPI clock ratio. Options are: Auto (default), x12~x44. The item is adjustable only if a CPU with unlocked clock ratio is installed. The adjustable range is dependent on the CPU being installed. a- QPI Link Speed Displays the current operating QPI link speed. >>>>> Standard Clock Control o- Base Clock|BCLK) Control Enables or disables the control of CPU base clock. Enabled will allow the BCLK Frequency|Mhz) item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled) BCLK Frequency|Mhz| Allows you to manually set the CPU base clock. The adjustable range is from 100 MHz to 600 MHz. This item is configurable only if the Base Clock|BCLK) Control option is enabled. Important: It is highly recommended that the CPU frequency be s...