Then press to move onto the next step. = [ Create New RAID ] = Name: GRAID Level: |0-Stnpe^^^| Disks: Select Disk Block: 128 KB Size: 240 GB Gigabyte Technology Corp. RAID Setup Utility v1.07.06 [ Hard Disk Drive List ] : A HDD0: ST3120026AS 1 HDD1: ST3120026AS 1 Type/Status Non-RAID Non-RAID Confirm Creation = [ RAID Disk Drive List ] = Select RAID Level - Data striped for performance - Data mirrored for redundancy - Data concatenated for huge temporarily disk required [ti]-Switch RAID Level [ENTER]-Next [ESC]-Abort RAID 0 RAID 1 JBOD Figure 5 Appendix - 84 - 3. Assign Array Disks: After a RAID mode is selected, RAID BIOS automatically assigns the two hard drives installed as the RAID drives. 4. Set Block Size (RAID 0 only): Under the Block item, use the up or down arrow key to select the stripe block size (Figure 6), ranging from 4 KB to 128 KB. Press . = [ Create New RAID ] = Name: GRAID Level: 0-Stripe Disks: Select Disk Block: |128 KB Size: 240 GB Gigabyte Technology Corp. RAID Setup Utility v1.07.06 [ Hard Disk Drive List ] Available I ► HDD0: ST3120026AS 120 GB I ► HDD1: ST3120026AS 120 GB Confirm Creation [ti]-Switch RAID Block Size Type/Status Non-RAID Non-RAID Setting Stripe Block Select a stripe size which will be used to divide data from/to seperate RAID members. The following are typical values: [ENTER]-Next Figure 6 [ESC]-Abort 5. Set Array Size: Under the Size item, enter the size of the array and press . 6. Confirm Creation: After all of the items above are configured, the selection bar automatically jumps to the Confirm Creation item. Press . When prompted to confirm your selection (Figure 7), press to confirm or to abort. [ Create New RAID ] Gigabyte Technology Corp. RAID Setup Utility v1.07.06 [ Hard Disk Drive List ] = Name: GRAID Model Name Available Level: 0-Stripe ► HDD0 ST3120026AS 120 GB Disks: Select Disk ► HDD1 ST3120026AS 120 GB Block: 128 KB Size: 240 GB = [ RAID Disk Drive I ——G]-Switch Unit Type/Status Non-RAID Non-RAID Create RAID on the select HDD (Y/N) ? Y CONFIRM RAID CREATION ALL DATA ON THE SELECTED HARD DISK WILL BE LOST WHEN EXIT WITH SAVING [DEL,BS]-Delete Number [ENTER]-Next Figure 7 - 85 - Appendix When finished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 8). Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save And Exit Setup Exit Without Saving Gigabyte Technology Corp. RAID Setup Utility v1.07.06 [ Hard Disk Drive List ] Model Name C HDD0: ST3120026AS 1 HDD1: ST3120026AS 1 Type/Status RAID Inside RAID Inside = [ RAID Disk Drive List ] Model Name RAID Level RDD0: GRAID 0-Stripe Members(HDDx) 01 [ ——» TAB]-Switch Window [H]-Select ITEM [ENTER]-Action Capacity 240 GB Status Normal Figure 8 To check more detailed information about the array, use the key while in the Main Menu block to move the selection bar to the RAID Disk Drive List block. Select the array and press . A small window displaying the array information will appear in the center of the screen (Figure 9). [ Main Menu ] Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save And Exit Setup Exit Without Saving = [ RAID Disk Drive List ] Model Name RAID RDD0: GRAID 0-Strip Gigabyte Technology Corp. RAID Setup Utility v1.07.06 [ Hard Disk Drive List ] Model Name C HDD0: ST3120026AS 1 HDD1: ST3120026AS 1 : [ RAID Information ] = Members: HDD 01 Status: Normal Capacity Type/Status 120 GB RAID Inside 120 GB RAID Inside Members(HDDx) 01 g TAB]-Switch Window [U]-Select RAID [ENTER]-Detail GRAID 0-Stripe 128KB 240GB Figure 9 Appendix - 86 - 7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in the main screen to save your settings before exiting the RAID BIOS utility, then press (Figure 10). = [ Main Menu ] Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Gigabyte Technology Corp. RAID Setup Utility v1.07.06 [ Hard Disk Drive List ] Model Name C HDD0: ST3120026AS 1 HDD1: ST3120026AS 1 Type/Status RAID Inside RAID Inside Exit Without Saving = [ RAID Disk Drive I Model Name I RDD0: GRAID Save to Disk & Exit (Y/N) ? Y JJ Members(HDDx) 01 g TAB]-Switch Window [U]-Select ITEM [ENTER]-Action Figure 10 Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA RAID/ AHCI driver and operating system. Delete the RAID Array: To delete the array, select Delete RAID Disk Drive in the main menu and press . The selection bar will move to the RAID Disk Drive List block. Press the space bar on the array to be deleted; a small triangle will appear to mark the selected array. Press . When prompted to confirm your selection (Figure 11), press to con...
Iniciar sesión: