Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
(Default) ►► Profilel Uses Profile 1 settings. ►► Profile2 Uses Profile 2 settings. o" (G)MCH Frequency Latch Allows you to fix the chipset frequency at system bootup. Options for adjusting memory multiplier below may differ according to the fixed frequency. Options are: Auto (default), 200MHz, 266MHz, 333MHz, 400MHz. o" System Memory Multiplier (SPD) Allows you to set the system memory multiplier. Options are dependent on CPU FSB and the (G)MCH Frequency Latch settings. Auto sets memory multiplier according to memory SPD data. (Default: Auto) o- Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the CPU Host Frequency (Mhz) and System Memory Multiplier settings. o" DRAM Timing Selectable (SPD) Manual allows all DRAM Timing items below to be configurable. Options are: Auto (default), Manual. (Note) This item appears only if you install a memory module that supports this feature. GA-EP45-DS3P Motherboard - 42 - >>>>> Standard Timing Control o- CAS Latency Time Options are: Auto (default), 3~7. ■=» tRCD Options are: Auto (default), 1~15. ■=“ tRP Options are: Auto (default), 1~15. ■=» tRAS Options are: Auto (default), 1 ~63. >>>>> Advanced Timing Control o" Advanced Timing Control CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced Timing Control x tRRD 2 Auto Item Help x tWTR 2 Auto Menu Levels x tWR 4 Auto x tRFC 28 Auto x tRTP 2 Auto x Command Rate (CMD) 0 Auto >>>>> Channel A x Static tRead Value 4 Auto x tRD Phase0 Adjustment 0 Auto x tRD Phase1 Adjustment 0 Auto x tRD Phase2 Adjustment 0 Auto x tRD Phase3 Adjustment 0 Auto x Trd2rd(Different Rank) 6 Auto x Twr2wr(Different Rank) 6 Auto x Twr2rd(Different Rank) 5 Auto x Trd2wr(Same/Diff Rank) 8 Auto >>>>> Channel B x Static tRead Value 4 Auto x tRD Phase0 Adjustment 0 Auto TX^^: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced Timing Control x tRD Phase1 Adjustment x tRD Phase2 Adjustment x tRD Phase3 Adjustment x Trd2rd(Different Rank) x Twr2wr(Different Rank) x Twr2rd(Different Rank) x Trd2wr(Same/Diff Rank) _Item Help Menu Levels Ti^^: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults - 43 - BIOS Setup Auto Auto Auto Auto Auto Auto Auto ******** Advanced Timing Control ******** o- tRRD Options are: Auto (default), 1~15. o- tWTR Options are: Auto (default), 1~31. o- tWR Options are: Auto (default), 1~31. o- tRFC Options are: Auto (default), 1 ~255. o- tRTP Options are: Auto (default), 1~15. c- Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A o- Static tRead Value Options are: Auto (default), 1~15. o- tRD Phase0 Adjustment Options are: Auto (default), 1-Advanced, 0-Normal. o- tRD Phase1 Adjustment Options are: Auto (default), 1-Advanced, 0-Normal. o- tRD Phase2 Adjustment Options are: Auto (default), 1-Advanced, 0-Normal. o- tRD Phase3 Adjustment Options are: Auto (default), 1-Advanced, 0-Normal. o" Trd2rd(Different Rank) Options are: Auto (default), 1~15. o- Twr2wr(Different Rank) Options are: Auto (default), 1~15. o- Twr2rd(Different Rank) Options are: Auto (default), 1~15. o- Trd2wr(Same/Diff Rank) Options are: Auto (default), 1~15. >>>>> Channel B o- Static tRead Value Options are: Auto (default), 1~15. o- tRD Phase0 Adjustment Options are: Auto (default), 1-Advanced, 0-Normal. c- tRD Phase1 Adjustment Options are: Auto (default), 1-Advanced, 0-Normal. c- tRD Phase2 Adjustment Options are: Auto (default), 1-Advanced, 0-Normal. GA-EP45-DS3P Motherboard - 44 - o- tRD Phase3 Adjustment Options are: Auto (default), 1-Advanced, 0-Normal. o- Trd2rd(Different Rank) Options are: Auto (default), 1~15. o" Twr2wr(Different Rank) Options are: Auto (default), 1~15. o- Twr2rd(Different Rank) Options are: Auto (default), 1~15. o- Trd2wr(Same/Diff Rank) Options are: Auto (default), 1~15. ******** Mother Board Voltage Control ******** >>> CPU o- CPU Vcore The default is Auto. o- CPU Termination The default is Auto. ^ CPU PLL The default is Auto. o- CPU Reference The default is Auto. o- CPU Reference2 The default is Auto. >>> MCH/ICH o- MCH Core The default is Auto. o- MCH Reference The default is Auto. o- MCH/DRAM Reference The default is Auto. ICH I/O The default is Auto. ICH Core The default is Auto. >>> DRAM o- DRAM Voltage The default is Auto. o- DRAM Termination The default is Auto. o- Channel A Reference The default is Auto. o" Channel B Reference The default is Auto. - 45 - BIOS Setup 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2008 Award ...