Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled) o" CPU Host Frequency (Mhz) Allows you to manually set the CPU host frequency. This item is configurable only if the CPU Host Clock Control option is enabled. The adjustable range is from 100 MHz to 1200 MHz. For an 800 MHz FSB CPU, set this item to 200 MHz. For a 1066 MHz FSB CPU, set this item to 266 MHz. For a 1333 MHz FSB CPU, set this item to 333 MHz. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. o" PCI Express Frequency (Mhz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 90 MHz to 150 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) (Note) This item appears only if you install a CPU that supports this feature. GA-EG41M-S2H/S2 Motherboard -40- >>>>> Advanced Clock Control o Advanced Clock Control =>■ CPU Clock Drive Allows you to adjust the amplitude of the CPU and North Bridge clock. Options are: 700mV, 800mV (default), 900mV, 1000mV. o PCI Express Clock Drive Allows you to adjust the amplitude of the PCI Express and North Bridge clock. Options are: 700mV, 800mV (default), 900mV, 1000mV. o CPU Clock Skew Allows you to set the CPU clock prior to the North Bridge clock. Options are: 0ps~750ps. (Default: 0ps) o MCH Clock Skew Allows you to set the North Bridge clock prior to the CPU clock. Options are: 0ps~750ps. (Default: 0ps) ******** DRAM Performance Control ******** o Performance Enhance Allows the system to operate at three different performance levels. ►► Standard Lets the system operate at its basic performance level. (Default) ►► Turbo Lets the system operate at its good performance level. ►► Extreme Lets the system operate at its best performance level. o (G)MCH Frequency Latch Allows you to fix the chipset frequency at system bootup. Options for adjusting memory multiplier below may differ according to the fixed frequency. Options are: Auto (default), 200MHz, 266MHz, 333MHz. - 41 - BIOS Setup System Memory Multiplier (SPD) Allows you to set the system memory multiplier. Options are dependent on CPU FSB and the (G)MCH Frequency Latch settings. Auto sets memory multiplier according to memory SPD data. (Default: Auto) e- Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the CPU Host Frequency (Mhz) and System Memory Multiplier settings. o" DRAM Timing Selectable (SPD) Manual allows all DRAM timing control items below to be configurable. Options are: Auto (default), Manual. >>>>> Standard Timing Control o" CAS Latency Time Options are: Auto (default), 3~7. ^ tRCD Options are: Auto (default), 1~15. o- tRP Options are: Auto (default), 1 ~15. ^ tRAS Options are: Auto (default), 1 ~63. >>>>> Advanced Timing Control ^ Advanced Timing Control CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced Timing Control x tRRD Auto Item Help x tWTR Auto Menu Levels x tWR Auto x tRFC Auto x tRTP Auto x Command Rate (CMD) Auto >>>>> Channel A ► Channel A Timing Settings [Press Enter] ► Channel A Driving Settings [Press Enter] >>>>> Channel B ► Channel B Timing Settings [Press Enter] ► Channel B Driving Settings [Press Enter] Ti^^: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults GA-EG41M-S2H/S2 Motherboard - 42 - ******** Advanced Timing Control ******** O- tRRD Options are: Auto (default), 1~15. ^ tWTR Options are: Auto (default), 1~31. o- tWR Options are: Auto (default), 1~31. ^ tRFC Options are: Auto (default), 1 ~255. ^ tRTP Options are: Auto (default), 1~15. o- Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B o- Channel A/B Timing Settings Static tRead Value Options are: Auto (default), 1~15. o- tRD Phase0 Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. o- tRD Phase1 Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. o- tRD Phase2 Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. o- tRD Phase3 Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. - 43 - BIOS Setup o- Trd2rd(Different Rank) Options are: Auto (default), 1~15. o- Twr2wr(Different Rank) Options are: Auto (default), 1~15. o- Twr2rd(Different Rank) Options are: Auto (default), 1~15. o- Trd2wr(Same/Diff Rank) Options are: Auto (default), 1~15. o- DIMM1 Clock Skew Control Options are: Auto (default), +800ps~-700ps. o- DIMM2 Clock Skew Control Options are: Auto (default), +800ps~-700ps. o- DDR Write Training Allows you to determine whether to fine-tune memory parameters to enhance memory compatibility. ►► Auto Lets the B...