Votos - , Puntuación media:
(
)
)
Fabricar: Gigabyte
Tamaño del archivo: 7.91 mb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Otros manuales para este modelo:
Resumen del manual
If this occurs, clear the CMOS values and reset the board to default values.) Robust Graphics Booster Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo. CPU Clock Ratio (Note) Allows you to alter the clock ratio for the installed CPU. The item is present only when a CPU with unlocked clock ratio is installed. Fine CPU Clock Ratio (Note) Allows you to increase clock ratio by 0.5 for the installed CPU. The item is present only when a CPU with unlocked clock ratio is installed. CPU Frequency Displays the current operating CPU frequency. Clock Chip Control >>>>> Standard Clock Control a- CPU Host Clock Control Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency Item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled) (Note) This item is present only when you install a CPU that supports this feature. - 22 - cf CPU Host Frequency (Mhz) Allows you to manually set the CPU host frequency. The adjustable range is from 100 MHz to 1200 MHz. This item is configurable only if the CPU Host Clock Control option is enabled. For an 800 MHz FSB CPU, set this item to 200 MHz. For a 1066 MHz FSB CPU, set this item to 266 MHz. For a 1333 MHz FSB CPU, set this item to 333 MHz. Important: It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. c PCI Express Frequency (Mhz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 90 MHz to 150 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) ******** DRAM Performance Control ******** Performance Enhance Allows the system to operate at three different performance levels. ►► Standard Lets the system operate at its basic performance level. (Default) ►►Turbo Lets the system operate at its good performance level. ►► Extreme Lets the system operate at its best performance level. o- (G)MCH Frequency Latch Allows you to fix the chipset frequency at system bootup. Options for adjusting memory multiplier below may differ according to the fixed frequency. Options are: Auto (default), 200MHz, 266MHz, 333MHz. o- System Memory Multiplier (SPD) Allows you to set the system memory multiplier. Options are dependent on CPU FSB and the (G)MCH Frequency Latch settings. Auto sets memory multiplier according to memory SPD data. (Default: Auto) Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings. o- DRAM Timing Selectable (SPD) Manual allows all DRAM timing control items below to be configurable. Options are: Auto (default), Manual. >>>>> Standard Timing Control o- CAS Latency Time Options are: Auto (default), 4~11. O“ tRCD Options are: Auto (default), 1~15. o- tRP Options are: Auto (default), 1~15. o- tRAS Options are: Auto (default), 1~63. - 23 - >>>>> Advanced Timing Control o- Advanced Timing Control CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Advanced Timing Control x tRRD x tWTR x tWR x tRFC x tRTP x Command Rate (CMD) >>>>> Channel A ► Channel A Timing Settings ► Channel A Driving Settings >>>>> Channel B ► Channel B Timing Settings ► Channel B Driving Settings ti^^: Move Enter: Select F5: Previous Values Item Help Menu Level ►► [Press Enter] [Press Enter] [Press Enter] [Press Enter] +/-/PU/PD: Value F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults O- tRRD Options are: Auto (default), 1~15. o- tWTR Options are: Auto (default), 1~31. o- tWR Options are: Auto (default), 1~31. o- tRFC Options are: Auto (default), 1~255. o- tRTP Options are: Auto (default), 1~15. o- Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B o- Channel A/B Timing Settings r CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Channel A/B Timing Settings x Static tRead Value x tRD Phase0 Adjustment x tRD Phase1 Adjustment x tRD Phase2 Adjustment x tRD Phase3 Adjustment x Trd2rd(Different Rank) x Twr2wr(Different Rank) x Twr2rd(Different Rank) x Trd2wr(Same/Diff Rank) x DIMM1 Clock Skew Control x DIMM2 Clock Skew Control x DDR Write Leveling x DDR Write Training Ti^^: Move Enter: Select F5: Previous Values Item Help Menu Level ►►► +/-/PU/PD: Value F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Auto Auto Auto Auto Auto Auto F10: Save Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto F10: Save - 24 - Static tRead Value Options are: Auto (default), 1~1...