Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. Robust Graphics Booster Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo. CPU Clock Ratio (Note) Allows you to alter the clock ratio for the installed CPU. The item is present only if a CPU with unlocked clock ratio is installed. CPU Host Clock Control Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled) (Note) This item appears only if you install a CPU that supports this feature. “5T" BIOS Setup English English o- CPU Host Frequency (Mhz) Allows you to manually set the CPU host frequency. This item is configurable only if the CPU Host Clock Control option is enabled. For an 800 MHz FSB CPU, set this item to 200 MHz. For a 1066 MHz FSB CPU, set this item to 266 MHz. For a 1333 MHz FSB CPU, set this item to 333 MHz. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. o- PCI Express Frequency (Mhz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 90 MHz to 150 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) o- C.I.A.2 CPU Intelligent Accelerator 2 (C.I.A.2) is designed to automatically adjust CPU computing power to maximize system performance. C.I.A.2 allows your system bus to be changed dynamically based on CPU loading through the use of 5 preset states. Note: System stability varies, depending on your system hardware components. » Disabled Disables the use of C.I.A.2. (Default) » Cruise Increases CPU frequency by 5% or 7% depending on CPU loading. »Sports Increases CPU frequency by 7% or 9% depending on CPU loading. » Racing Increases CPU frequency by 9% or 11% depending on CPU loading. »Turbo Increases CPU frequency by 15% or 17% depending on CPU loading. » Full Thrust Increases CPU frequency by 17% or 19% depending on CPU loading. Warning: Before using C.I.A.2, please first verify the overclocking capability of your CPU. As stability is highly dependent on system components, when system instability occurs after overclocking, lower the overclocking ratio. ^ Performance Enhance Allows the system to operate at three different performance levels. » Standard Lets the system operate at its basic performance level. »Turbo Lets the system operate at its good performance level. (Default) » Extreme Lets the system operate at its best performance level. o- System Memory Multiplier (SPD) Allows you to set the system memory multiplier. Options are dependent on CPU FSB. Auto sets memory multiplier according to memory SPD data. (Default: Auto) o- Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the CPU Host Frequency (Mhz) and System Memory Multiplier settings. o- High Speed DRAM DLL Settings Provides two different memory timing configurations. If your system becomes unstable after you overclock the DDR2 memory, select Option 1 or Option 2 to help make your system more ^ System Voltage Control Determines whether to manually set the system voltages. Auto lets BIOS automatically set the system voltages as required. Manual allows all voltage control items below to be configurable. (Default: Manual) GA-P35-DS3P Motherboard - 52 - o* DDR2 OverVoltage Control Allows you to to set memory voltage. » Normal Supplies the memory voltage as required. (Default) » +0.05V ~ +1.55V Increases memory voltage by 0.05V to 1.55V at 0.05V increment. Note: Increasing memory voltage may result in damage to the memory. ^ PCI-E OverVoltage Control Allows you to to set PCIe voltage. » Normal Supplies the PCIe bus voltage as required. (Default) » +0.05V ~ +0.35V Increases PCIe bus voltage by 0.05V to 0.35V at 0.05V increment. o- FSB OverVoltage Control Allows you to set the Front Side Bus voltage. » Normal Supplies the FSB voltage as required. (Default) » +0.05V ~ +0.35V Increases FSB voltage by 0.05V to 0.35V at 0.05V increment. o- (G)MCH OverVoltage Control Allows you to set the North Bridge voltage. » Normal Supplies the No...