Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
[....]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select Name : RAID_Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128KB Capacity : 223.5 GB Create Volume There are two RAID levels: RAID0(Stripe) and RAID1(Mirror). After selecting the RAID level, press Enter to select Strip Size. GA-8GNXP-D Motherboard - 70 English The KB is a unit of Strip Size. You can set disk block size with this item. The disk block size can be set from 4KB to 128KB. After you set disk block size, press Enter to set disk Capacity. Intel(R) Application Accelerator RAID Option ROM v4.0.6180 Copyright(C) 2003-04 Intel Corporation. All Rights Reversed. [ HELP ] [ CREATE VOLUME MENU ] Name : RAID_Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128KB Capacity : 223.5 GB Create Volume Choose the RAID level best suited to your usage model. The following are typical values: 16KB -Be st for sequential transfers 64KB -Good general purpose strip size 128KB Best performance for most desktops and workstations [....]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select Intel(R) Application Accelerator RAID Option ROM v4.0.6180 Copyright(C) 2003-04 Intel Corporation. All Rights Reversed. [ CREATE VOLUME MENU ] Name : RAID_Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128KB Capacity : 223.5 GB Create Volume [ HELP ] Enter the volume capa city. The default value indicate s the maximum volume capacity using the selected disks. If less than the maximum capacity is chosen, creation of a second volume is needed to utilize the remaining space. [....]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select Press Enter to enter Create Volume after setting disk capacity. -71 -Appendix Press Enter under the Create Volume item. English Intel(R) Application Accelerator RAID Option ROM v4.0.6180 Copyright(C) 2003-04 Intel Corporation. All Rights Reversed. [ CREATE VOLUME MENU ] [ HELP ] Pre ss "ENTER" to Create the specified volume [....]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select Name : RAID_Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128KB Capacity : 223.5 GB Create Volume An alert bar will be displayed warning you that all data on selected disks will be lost. Please press Y to complete the set-up of RAID. Intel(R) Application Accelerator RAID Option ROM v4.0.6180 Copyright(C) 2003-04 Intel Corporation. All Rights Reversed. [ CREATE VOLUME MENU ] Pre ss "ENTER" to Create the specified volume [....]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select Name : RAID_Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128KB Capacity : 223.5 GB WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to creat this volume? (Y/N) : GA-8GNXP-D Motherboard - 72 After the completion, you will see the detailed information about the RAID, such as RAID level, disk block size, disk name and disk capacity, etc. Intel(R) Application Accelerator RAID Option ROM v4.0.6180 Copyright(C) 2003-04 Intel Corporation. All Rights Reversed. [ MAIN MENU ] 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID 4. Exit [ DISK/VOLUME INFORMATION ] RAID Volume s : ID Name Level Strip Size Status Bootable 0 RAID_Volume0 RAID(Stripe) 128KB 223.5GB Normal Yes Physical Disks : Port Driver Model Serial # Size Type/Status(Vol ID) 0 ST3120026AS 3JT354CP 111.7GB Member Disk(0) 1 ST3120026AS 3JT329JX 111.7GB Member Disk(0) [....]-Select [ESC]-Exit [ENTER]-Select Menu Delete RAID Volume If you want to delete a RAID volume, please select the Delete RAID Volume option. Press Enter key and follow the instructions on the screen. Intel(R) Application Accelerator RAID Option ROM v4.0.6180 Copyright(C) 2003-04 Intel Corporation. All Rights Reversed. [ MAIN MENU ] 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID 4. Exit [ DISK/VOLUME INFORMATION ] RAID Volume s : ID Name Level Strip Size Status Bootable 0 RAID_Volume0 RAID(Stripe) 128KB 223.5GB Normal Yes Physical Disks : Port Driver Model Serial # Size Type/Status(Vol ID) 0 ST3120026AS 3JT354CP 111.7GB Member Disk(0) 1 ST3120026AS 3JT329JX 111.7GB Member Disk(0) [....]-Select [ESC]-Exit [ENTER]-Select Menu English -73 -Appendix English Installing the RAID drivers For the W indows operating system (Win NT, WinXP, Win2000 ), for IDE RAID/SCSI/Serial ATA functioning, the driver must first be transferred to a floppy disk. Please follow the steps below to complete driver transfer to a floppy disk: 1) Please insert the provided driver CD into the hard disk drive eg. Drive D: 2) Insert a blank formatted floppy disk into the floppy disk drive. 3) Either from "Command Prompt" or DOS, please type in "D:\BootDrv\menu.exe"(Refer to Fig.1) 4) Information on all chipsets should be listed on the screen (Refer to Fig.2), please select the proper chipset model. (Note) Fig.1 Fig.2 Your system will then automatically zip and transfer this driver file to the floppy disk. After you complete the steps, boot from t...