Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
If your AGP card has "AGP 4X/8X (1.5V) notch"(show below), please make sure your AGP card is AGP 4X/8X (1.5V). AGP 4X/8X notch Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/ G) / 850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system unable to boot up normally. Please insert an AGP 4X/8X card. Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode by adjusting the jumper. The factory default for this card is 2X(3.3V). The GA-8IPE775 Series (or any AGP 4X/8X only) motherboards might not function properly, if you install this card without switching the jumper to 4X(1.5V) mode in it. Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color", the graphics card manufacturer & some SiS 305 cards, their golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X (3.3V) only. The GA-8IPE775 Series (or any AGP 4X/8X only) motherboards might not function properly, If you install this card in it. Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage 128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V) specification. Therefore, AG32S(G) will work fine with Intel® 845(GE/PE) / 845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards. Before you install PCI cards, please remove the Dual BIOS label from PCI slots if there is one. • ..........The author assumes no responsibility for any errorsor omissions that may appear in this document nordoes the author make a commitment to update theinformation contained herein. • ..........Third-party brands and names are the property oftheir respective owners. • ..........Please do not remove any labels on motherboard, thismay void the warranty of this motherboard. • ..........Due to rapid change in technology, some of thespecifications might be out of date before publicationof this booklet. May 14, 2004 Mother Board GA-8IPE775 Pro/GA-8IPE775-G/GA-8IPE775 May 14, 2004 Mother Board GA-8IPE775 Pro/GA-8IPE775-G/GA-8IPE775 DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible Party Name:G.B.T. INC. (U.S.A.) Address: 17358 Railroad Street City of Industry, CA 91748 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Motherboard Model Number: GA-8IPE775 Pro/GA-8IPE775-G /GA-8IPE775 Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109 (a),Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation. Representative Person’s Name: ERIC LU Signature: Eric Lu Date: May 14, 2004 GA-8IPE775 Series Intel® Pentium® 4 Socket 775 Processor Motherboard USER'S MANUAL Pentium® 4 Processor Motherboard Rev. 1004 12ME-8IPE775-1004 Table of Content English Warning ................................................................................................... 4 Chapter 1 Introduction ............................................................................. 5 Features Summary ...................................................................................... 5 GA-8IPE775 Series Motherboard Layout .................................................... 7 Block Diagram ............................................................................................. 8 Chapter 2 Hardware Installation Process ............................................. 11 Step 1: Install the Central Processing Unit (CPU) ..................................... 12 Step 1-1: Installation of the CPU .................................................................................... 12 Step 1-2: Installation of the Heatsink .............................................................................. 13 Step 2: Installation of Memory ................................................................... 13 Step 3: Install expansion cards ................................................................. 16 Step 4: Install I/O Peripherals Cables ....................................................... 17 Step 4-1: I/O Back Panel Introduction ............................................................................ 17 Step 4-2: Connectors Introduction .................................................................................. 19 Chapter 3 BIOS Setup .......................................................................... 31 The Main Menu (For example: BIOS Ver. : 8IPE775 Pro.D4) .................. 32 Standard CMOS Features ......................................................................... 34 Advanced BIOS Features .......................................................................... 37 Integrated Peripherals ...............................................................................